AbstractThis study aims to investigate the environmental impacts of the municipal waste disposal facility of Pata Rat, Cluj-Napoca, Romania during dry periods of the year. The environmental impact assessment on the landfill site was carried out on the basis of the measurements of environmental quality indicators. Environmental indicators were measured in the surface water, soil and air. For the assessment of the environmental impacts generated by landfill on surface water measurements were carri...
Autori: Ákos Rédey, Anca Gurzau, Antoanela Popovici, Constantin Măruţoiu, Fazekas Bence, , Ildiko Varga, Raluca Mariana Haţegan, Tatiana Yuzhakova
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26296

AbstractCosmetics, toiletry and household cleaning products are often based on different types of polymeric gels with specific rheologicalbehavior. Dynamic shear oscillation measurements were used for the monitoring of in situ polymerization process, and todetermine the viscoelastic properties of the hydrogels based on polyacrylamide and acetone-formaldehyde resin. Both storagemodulus G’ and loss modulus G” were measured in real time during the gelation process carried out directly between the p...
Autori: Andrei Rosu, Camelia Mihăilescu, Constanţa Ibănescu, Gabriela Halitchi, Maria Lungu, Maricel Danu, Simona Bistriceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26326

AbstractAs air quality becomes increasingly deteriorated in world-wide cities, air quality monitoring has extended beyond the criteriapollutants (CO, SO2, NOx, O3 and PM) in order to include several toxic air pollutants such as volatile organic compounds(VOCs). In the present study it was investigated the presence of 29 VOCs and PM including PM2.5, PM2.5-10 and PM>10 fractions,in an urban area from Romania. The total VOCs was higher in the urban area (176.72 - 192.54 μg/m3) than in the r...
Autori: Carmen Roba
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26504

Abstract The aim of this study is to assess indoor air quality in an educational institute located in a suburban area of the Po plain (Italy). Samplings are carried out in preschool and elementary school classrooms, and also in the garden of the institute, to have information on outdoor levels. The monitoring is performed to determine the most important indoor pollutants (i.e. volatile organic compounds (VOCs), carbonyls and NO2), by using diffusive passive samplers. Sampling in the classroo...
Autori: Ivano Vassura
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26797

Abstract Much attention is paid to removing formaldehyde from indoor air to decrease the health risk for urban inhabitants since formaldehyde is a main indoor pollutant causing various symptoms. In this study, formaldehyde removal by the shoots of potted Chlorphytum comosum (spider plant), Epipremnum aureum (golden pothos) and Aloe vera (aloe) was investigated with a dynamic chamber technique. The results indicated that the order of formaldehyde removal capacities for the plant shoots was C....
Autori: Haiping Hou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26908

This paper reports the potential of rice husk waste biomass to remove copper (II) from simulated wastewater under different experimental conditions. For this, rice husk has been pre–treated by boiling, formaldehyde and concentrated sulphuric acid. Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy and Energy dispersive analysis X–ray analyses were performed before and after adsorption, to explore number and position of the functional groups available for copper ...
Autori: Manjeet Bansal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27095

In this study, silica gel initially reacted with N-(2-aminoethyl)-3-aminopropyl-triethoxysilane and subsequently with formaldehyde resulted in a modified solid that contained amino imine groups, Sil2NCH2. The solids were characterized by CHN elemental analysis, thermogravimetric analysis (TGA/DTG), FTIR spectroscopy, 13C solid-state NMR, and nitrogen adsorption/desorption measurements. The adsorption of Cd(II), Pb(II) and Cr(VI) ions onto Sil2NCH2 in aqueous solutions were examined to study the ...
Autori: Franklin Pessoa Aguiar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27242

Average emission factors of air toxic compounds, emitted from motorcycles in Bangkok, Thailand were analyzed using the IVE (International Vehicle Emission) model. The model was utilized taking into account the actual fleet and characteristics of motorcycles of the study area. Four air toxic compounds (namely benzene, 1,3 butadiene, acetaldehyde and formaldehyde) and their emission rates were calculated under two main pollution abatement scenarios (the improvement of fuel quality and switching of...
Autori: Pantitcha Outapa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27513

Simulation experiments were conducted to investigate the behaviour of ozonation by-products and the removal of organic matter in the treatment of the Pearl River raw water. The treatment processes include pre-ozonation, conventional treatment processes (coagulation/sedimentation and sand filtration), post-ozonation and granular activated carbon (GAC) filtration. Treatment efficiency of each unit process was evaluated by using several parameters such as permanganate index (CODMn), ultraviolet abs...
Autori: Yue Wu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27580

Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

In this study, the effect of raw material formulation used in the core layer on the water resistance and mechanical properties of particleboard made from a mixture of rice husk and wood particles was investigated. For this aim, four series of particleboard core layer were produced from different proportions of rice husk/wood particles, different amounts of urea-formaldehyde (UF) adhesive, low density polyethylene (LDPE), and maleic anhydride grafted polyethylene (MAPE), respectively. The amounts...
Autori: Jin Heon Kwon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27871