AbstractMunicipal solid waste (MSW) management is an important and challenging issue for sustainable development. It is also one of themost controversial problems and a subject of an ongoing debate between different interested parties. A particularly controversial issue is MSW incineration (with or without energy recovery) which has in many countries become a socially unacceptable option for dealing with solid waste. On the other hand, the increasing amounts of waste each year demand immediate a...
Autori: Adisa Azapagic
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25147

Include urmatoarele articole:� Keynote Lectures Energy from municipal solid waste: large-scale incineration or small-scale pyrolysis?� Electrical properties of SnO2-Pt/Al2O3 in reduction atmosphere� Corporate management tools to address sustainability Challenges. A reflection on the progress and difficulties experienced during the last decade� Emerging academic responsibilities and opportunities for promoting regional sustainability� Challenges for integrated water resources management...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25200

Abstract The paper presents a comparative approach concerning the properties of TiO2 thin layers obtained via spray pyrolysis deposition (SPD) using hydrophilic and hydrophobic polymers as additives. The influences of composition (X-ray diffraction), morphology (Atomic Force Mycroscopy, Contact angle) and optoelectric (electrical conductivity, absorption, band gap and photocurrent) properties on the photocatalytic activity of the layers were studied. ...
Autori: Alexandru Enesca, Luminita Andronic, Anca Duta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25479

Abstract In order to improve the photo-efficiency of the electronic process as well as the response into the visible part of the spectrum, TiO2 doping with heavy metal (cadmium, cooper and nickel) have been employed. The objectives of this work are: (a) to prepare doped Me(Cd, Cu, Ni) TiO2 by doctor blade (DB) and spray pyrolysis deposition (SPD) techniques, (b) to characterize the catalysts, (c) to study and compare the activity of the Cd-TiO2, Cu-TiO2 and Ni-TiO2 catalysts on methyl orange ...
Autori: Luminita Andronic, Bianca Hristache, Alexandru Enesca, Anca Duta, Maria Visa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25480

? AN ASSESSMENT OF OPERATIONAL PARAMETERS FOR THE REMOVAL OF CHLOROPHENOLS FROM WASTEWATER ? ENVIRONMENTAL SCIENCES: A PSYCHOLOGICAL-BEHAVIORAL MODEL FOR RESEARCHERS ? ECOLOGICAL AGRICULTURE: DYNAMICS OF THE BIOLOGICAL ACTIVITIES IN SOILS CULTIVATED WITH MAIZE UNDER THE INFLUENCE OF ORGANIC FERTILIZATION ? SOLAR-ASSISTED JOULE-BRAYTON ENGINES USED TO REDUCE CARBON DIOXIDE EMISSIONS ? STUDY OF THE ENVIRONMENTAL EFFECTS OF HEATING SYSTEMS ? MIXED JET-VORTEX METHOD FOR ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25662

Abstract:The paper presents the virtual prototype of a robotic system for spray pyrolysis deposition (SPD). To design of the mechanicaldevice model of the robotic system, the MBS environment ADAMS of MSC Software was used, while the MATLAB/Simulink ofMathworks was used for the dynamic analysis of the robotic system, according to the mechatronic concept. A control loop waschosen, composed by a multi-body mechanical model, connected to the dynamic model of each motor. The main objective is toverif...
Autori: Cătălin Alexandru, Monica Enescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25744

Abstract:Films of CuxS with 430-700 nm thickness were deposited by robotic spray pyrolysis technique, at T = 300Â?C, using 90 sprayingsequences, from water:ethanol:glycerol = 7:2:1 (in volumes) solutions with a molar ratio Cu:S = 1:2.5-3.5. Relative dense,homogenous and uniform films of CuxS (x = 1.8-2), with Eg = 1.97-2.49 eV and exhibiting electric resistance behavior wereobtained. The as-deposited films were annealed in air or in sulfur atmosphere, at 300 Â?C, for one hour. Dense and uniform ...
Autori: Alexandru Enesca, Anca Duta, Ionut Popovici, Luminita Isac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25749

The book edited by Haibo Xie and NicholasGathergood focuses on one of the most importantscientific issues of the 21 century which is thereplacing fossil fuel with sustainable alternatives suchas biomass. Fossil fuels are conventional rawmaterials for many industrial sectors includingchemical and energy production. Usage of fossil fuelis limited by their availability, price and carbonfootprint. Biomass is a renewable resource globallyavailable, cheaper and carbon sequestering. Step bystep shiftin...
Autori: Adrian Catalin Puitel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26101

Abstract Being involved in the synthesis of precursors for amphetamine and amphetamine-like drugs, pyridine (Py) may be also regarded as a by-product found when these drugs are obtained via the Leuckart method. Also, pyridine is well known as a biomarker of microorganisms, when those are subjected to pyrolysis before analysis by various instrumental techniques. Consequently, since Py is not commonly found in the air, its presence as a contaminant at trace levels in a room could ind...
Autori: George-Bogdan Ghira
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26109

AbstractThe right individuation of the more convenient solution for final treatment and destination of sewage sludge deriving fromwastewater plants, normally after anaerobic digestion process, is a very interesting problem, in accounting of urgent needs foracceptable solutions. The produced sludge, primarily after thermal drying, can be sent to energetic valorization processes as, forexample, incineration, gasification and also pyrolysis. In this work we examined the thermal solutions (both dire...
Autori: Deborah Panepinto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26435

AbstractThe general aim of this paper is to demonstrate the sustainable management of a broad spectrum of wastes (livestock, industrial,agri-food, agricultural and non-recyclable fraction proceeding from waste treatment plants) in an integrated plant. Thetechnological development and practical application of the “Mixed Plant” concept is used to achieve this objective. In order tovalorize in a joint form all the above-mentioned categories of waste, two different processes have been integrated. Th...
Autori: Dolores Hidalgo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26579

Abstract The utilization of manure for waste-to-bioenergy conversion processes may be a sustainable development choice rather than its traditional use as a fertilizer. Furthermore, the valorization of manure via thermochemical conversion routes and their integration with biological processes can provide an additional pathway in the utilization of residual biomass. On the other hand, the use of metal oxides might enhance the performance of thermochemical processes such as pyrolysis by either ...
Autori: Maria Fernandez-Lopez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26647

Abstract The increasing diffusion of Hi-tech complex products has raised the attention of scientific community towards their End of Life (EoL) treatment, both in terms of assuring an appropriate disposal, to avoid the dispersion of harmful substances, and at the aim of their exploitation as valuable sources of raw materials. Within this study an integrated approach for waste electrical and electronic equipment (WEEE) end of life treatment is proposed based on the integration of hydrometallur...
Autori: Claudia Brunori
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26777

Abstract New and end of life tires have been pyrolyzed in an innovative pilot plant that processes whole tires, thus saving the energy costs of shredding while allowing energy and materials recovery. Furthermore, the presence of a hydraulic guard guarantees high process safety. Several tests at different temperatures have been performed and the collected solid, liquid and gaseous products have been quantified and characterized. The influence of the maximum process temperature on yields and c...
Autori: Loris Giorgini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26783

Abstract The amount of collected Waste Electrical and Electronic Equipment (WEEE) in Europe is growing about 7 wt.-% per year (2007- 2012). It contains a number of economically relevant base, precious and high-tech metals. However, only a limited number of these metals can be recovered by currently applied recycling processes. Especially high-tech metals like gallium, germanium and tantalum get lost during the treatment of WEEE. The pyrolysis technology allows an accumulation of these metals...
Autori: Peter Hense
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26785

Abstract The recycling of plastic waste is important both in the conservation of resources and the environmental protection. A plastic waste (PE/PP/PS/PVC) was pyrolyzed over a series of post-use FCC catalysts using a fluidizing reaction system similar to the FCC process operating isothermally at ambient pressure. Experiments carried out with these catalysts gave good yields of valuable hydrocarbons with differing selectivity in the final products dependent on reaction conditions. A model ba...
Autori: Ta-Tung Wei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26836

Abstract In this study, activated carbon was synthesized from durian peel and used for the removal of lead (II) ions from water. The activated carbon was produced with physical activation method using CO2 as the activating agent at 900 oC. Prior to the activation process, durian peel was carbonized under either nitrogen atmospheric or vacuum pyrolysis in order to compare the properties of the synthesized activated carbons. Suitable adsorption kinetics and isotherm models for the lead (II) re...
Autori: Samorn Hirunpraditkoon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26901

In this paper both kinetic and thermodynamic parameters of thermochemical transformation of waste tires are evaluated by using thermogravimetric analysis (TGA). For rubber thermochemical decomposition, individually and in the presence of other tires components, some kinetic and thermodynamic parameters such as energy of activation (Ea), frequency factor (A), reaction enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) have been calculated by using the integration method. The e...
Autori: Sana Kordoghli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27060

The aim of this study is to investigate an innovative way to utilize the char obtained from tyres pyrolysis, in order to realize lightweight materials for building. Pyrolysis residue, mixed with three types of waste glass, has been used as raw material to obtain lightweight materials, exploiting its capability to behave as foaming agent. The results demonstrate that the pyrolysis char is a good foaming agent for the mixtures 50/50 with glassy sand and packaging glass waste, thermal treated at...
Autori: Fernanda Andreola
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27119

Carbonaceous materials were obtained from waste tyres and their potential application as hydrogen sulphide adsorbents was investigated. The adsorbents were obtained by pyrolysis of waste tyres and physical (CO2) or chemical (KOH) activation at 550 and 800ºC. The effect of modification conditions on the performance of waste tyres based materials as adsorbents of H2S at room temperature in dry and wet conditions was investigated. Sorption capacity of such adsorbents was found to strongly depe...
Autori: Magdalena Hofman-Bieniek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27263

This study presents the results obtained in tailoring thin films of alumina, deposited onto aluminium substrates by spray pyrolysis, at 250°C, using AlCl3 solutions (0.15M) in a water:ethanol (1:1) solvent mixture. As morphology controlling agents, acetylacetone and maleic acid based copolymers are added in the precursors’ solutions. The precursors’ systems are analyzed by FTIR spectroscopy and the surface morphology of alumina thin films is investigated by atomic force microscop...
Autori: Luminita Isac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27291

Effective adsorbents were developed from sewage sludge by chemical activation with different activators (5M ZnCl2, 3M H2SO4, 3M H3PO4, 5M ZnCl2: 3M H2SO4, and 5M ZnCl2: 3M H3PO4). The developed adsorbents were used for the removal of the heavy metals Cd (II), Pb (II), Cu (II) and Mn (II) from wastewater. The effect of several parameters (pH, initial metal ion concentration, adsorbent dose, contact time and solution temperature) on the metal adsorption capacity were evaluated by batch experiments...
Autori: Mohamed Nageeb Rashed
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27385

Social upgradation results more postconsumer glass and plastic waste and continuously demands newer techniques for their management. This research proposes a new waste-to-waste management strategy by using waste glass for polyolefin degradation. For this purpose, waste glass is activated by mechanochemical treatment and resultant material is used for the thermal pyrolysis of polyolefin. Certain improvement in the product quality is achieved by selectivity towards more alkane fraction. ...
Autori: Pooja Singh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27586

The thermal degradation of kenaf (Hibiscus cannabinus) under the effect of several variables (particle size, Ar flow rate, sample initial mass and heating rate) was investigated. From experimental data and by application of various model-free methods (Friedman, Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa), the activation energies (EA) were calculated as a function of conversion. The results obtained allowed to conclude that kenaf follows a multi-stage degradation mechanism, with EA values rang...
Autori: Silvia Román
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27617

According to recent estimations, the total yearly amount of end-of-life tyres (ELTs) arising in Europe exceeds 3 million tons; more than 95% are managed through mechanical and thermal treatments because ELTs represent a useful resource both of materials and energy. For this purpose, the goal of the present work is the assessment of the environmental impacts of a novel pyrolysis process and the comparison with alternative ELTs valorisation or disposal scenarios. Life Cycle Analysis (LCA) methodol...
Autori: Esmeralda Neri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27798

The effect of synthesis conditions on sorptive properties of glycerol-derived mesoporous carbon materials were studied. Sorption properties of the synthesized carbon-based materials regarding to different adsorbate molecules, as well as water vapors, phenol and methylene blue molecules were analyzed. The sorption capacity of the synthesized mesoporous carbons depends upon synthesis conditions, namely upon pyrolyzing temperature and carbon precursor to silica weight ratio, being determined by ...
Autori: Maria Ignat
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27880

The pyrolysis of frying palm oil was studied in continuous stationary process, in a micropilot plant. The main factors affecting the products yields are temperature and residence time. For the studied parameters range (temperature: 475oC - 630oC and residence time: 120 s- 240 s), the gas yield varied between 7.9% (w/w) and 63.3% (w/w), related to feed. Unsaturated hydrocarbon yields (olefins) can reach 24-29% (w/w) related to feed, at the right processing parameters, the main products having goo...
Autori: Ana Maria Sivriu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28162

Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

Car fluff is an important problem for the industrial compartment, especially for Italy, considering the huge amount of waste produced by the automotive sector, approx. 180.000 ton/year. Although car fluff (CER 191004) is suitable for CSS-Combustible production, with destination to cement factories, a very low amount of it reaches this destination. An alternative way to transform this problem into an opportunity consists into the transformation of bioliquid after its thermochemical transformati...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28289