AbstractIn this paper, the study of synthesis and stability in aqueous solutions of new coordination compounds of Ti(IV) and Zr(IV) with ligand N-hydroxy-succinimide is presented. The salts: TiOSO4¡2H2O and ZrOCl2¡8H2O used for obtaining the studied coordination complexes, can derive from recycling metallic residues resulted in mechanical technologies applied for titanium and zirconium in S.C. ZIROM S.A. Giurgiu.The new complexes were synthesized in aqueous solutions and stability were study u...
Autori: Adrian Cailean, Daniel Sutiman, Doina Sibiescu, Gabriela Apostolescu, Ioan Roşca, Marian Crudu, Mihaela Vizitiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25265

AbstractWood-based epoxy resin was synthesized from resorcinol-liquefied wood. First, wood components were depolymerized and liquefied by reaction with resorcinol. The resorcinol-liquefied wood with plenty of hydroxyl groups could be considered as a precursor for synthesizing wood-based epoxy resin. Namely, the phenolic-OH groups of the liquefied wood reacted with epichlorohydrine under alkali condition. By the glycidyl etherification, epoxy functionality was introduced to the liquefied wood. Th...
Autori: Akira Fujita, Hajime Kishi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25310

AbstractThe purpose of this study is to analyze the recycling potential of printing papers, which are obtained by two different filler loading processes: conventional loading by direct addition of calcium carbonate to cellulose fiber suspension and in-situ loading by precipitating calcium carbonate within cell wall and lumen of pulp fibres. In order to evidence the influences of the both filler content and loading method, a reference sample for recycling was obtained without filler, but using th...
Autori: Maria Ciobanu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25386

AbstractThe study presents the processing possibilities for marc resulted as still residue from the distillation of fermented fruits in view to obtain a compacted solid fuel. Initial marc composition (carbon, hydrogen, nitrogen, sulphur and oxygen contents) determined by elemental analysis is evidenced, as well as technical characterisation (ash and moisture contents) and ash's qualitative composition, chemical characterisation of the liquid phase (pH, total phosphorus, acidity and conductivity)...
Autori: Daniela Simina Stefan, Anca-Ileana Penu, Mircea Stefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25391

Abstract This paper presents a comparative study of natural and mechanically mixed composting processes of marc resulting as a byproduct during the production of alcohol obtained from fermented fruits. Moisture, temperature, pH values, soluble fraction, total organic carbon, Kjeldahl nitrogen and ash content were monitored for 60 days. During this period the atmospheric temperature varied from 18Â?C to 21Â?C. The composting process could be considered a combination of three stages: mesophilic...
Autori: Anca-Ileana Penu, Daniela Simina Stefan, Mircea Stefan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25407

Abstract This paper aims to propose a new solution for rational valorization of the secondary powder materials from steel makingin electric arc furnaces. The elaborated steel quality as well as the economical advantages represented by secondary powdermaterials recirculation were studied. A good correlation between the proportion of brickets loaded into the melt and the melting ofcarbon has been found. The proportion of the EAF dust brickets can grow even at 5-7%. Zinc presence could havenegat...
Autori: Mirela Gabriela Sohaciu, Avram Nicolae, Cristian Predescu, Stefan Velicu, Gheorghe Gh. Calea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25438

Abstract Literature data show that in general, plastics produced through the mechanical recycling route involve less carbon dioxide emission than when produced from crude oil. A review of readily available data shows that road transport of untreated waste plastics account for a significant portion of the carbon dioxide emission generated during recycling. Therefore, much carbon dioxide emission can be saved by optimizing the logistics in the recycling of plastics. On the example of polyolefi...
Autori: Peter C. Rem, Stig Olsen, Jan-Henk Welink, Norbert Fraunholcz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25442

Abstract The waste recycling done in order to obtain composite products with performant properties and also, with long life cycle is the main purpose for the sustainable development. The present paper describes the way in which, different kind of solid wastes are immobilised in an organic resin as a binder matrix. Composites with different proportion of waste as, rubber/plastic, glass and silica sand have been obtained. The physical-mechanical properties and chemical stability of such organic...
Autori: Ioan Ropota, Emilia Zamfirache, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25450

Abstract In the new millennium to sustain a healthy life in harmony with nature, it will be extremely important to develop various materials and processes that minimize any harmful influence on the environment. The feasibility of sludge recycling in the brick manufacture was evaluated through laboratory testing. Several ceramic masses with clay, sand and various proportion of sludge have been synthesized and than characterized by their physical-mechanical properties. Sludge fineness also has ...
Autori: Ana - Maria Szoke, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25454

Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

AbstractThe mechanization technologies of soil works have a major impact on physical state of soil. This situation is generated by the mechanical action of working parts which are involved in soil works and by the traffic of running systems of tractors and agricultural machines.These mechanization technologies have been tested to determine which of them correspond to the highest degree of sustainable agriculture concept and ensure protection, preservation and improvement of agricul...
Autori: Cornelia Muraru-Ionel, Gerard Jitareanu, Ioan Tenu, Petru Cojocariu, Vergil Marian Muraru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25506

Abstract The paper focuses on occupational hazards and the determination of risk levels. Indoor climate, lighting, noise, chemicals and dust are examined. A simple/flexible risk assessment method is provided. The results of measurements of occupational hazards in six industries (mechanical, printing, wood, plastic, clothing and water purification plants) in Estonia are presented. The overall purpose of the paper is to draw the attention to the importance of measurements of occupational hazard...
Autori: Piia Tint, Marina Jarvis, Karin Reinhold, Onnela Paas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25521

Abstract In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part of these wastes can be used in different ways: for replacing the cement, as addition in concrete, as component of cements, in the mixture of polymer concrete, etc. In the present investigati...
Autori: Marinela Bărbuţă, Nicolae Taranu, Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25525

Abstract In this work the experimental conditions to synthesize, by direct hydrothermal synthesis, self-bonded pellets of ETS-10 phase containing iron were studied. The following gel composition was used: xNa2O-0.6KF-1.28xHCl-yFe2O3-0.2TiO2-1.49SiO2-39.5H2O with 0.8Â???xÂ???1.4 and 0.015Â???yÂ???0.08. The products obtained were characterized through X-ray diffraction on powders (XRD), thermal analysis (TG, DSC, DTG), scanning electron microscopy (SEM) and microanalysis (EDS). The data obtai...
Autori: Pierantonio De Luca, Danilo Vuono, Monica Filice
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25544

Abstract The slags are an important waste and by-products of metallurgical industry. The present paper summarizes results obtained from physical and chemical analyses on metallurgical slag provided from S.C. ?Mittal Steel Galati? S.A. The physical structure and gradation of granulated slag depend on the chemical composition of the slag, its temperature at the time of water quenching, and the method of production. The following mineralogical components were noticed through bypowder X-ray diffr...
Autori: Maria Cioroi, Licuta Nistor Cristea, Igor Creţescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25588

? GREEN SYNTHESIS OF SYMMETRICAL CARBONATE FT-IR STUDY ? SINTERED BASALT AS A PROMISING SUSTAINABLE MATERIAL IN MECHANICAL ENGINEERING ? DESIGN OF BUILDINGS INCLUDING ENVIRONMENTAL IMPACT ? ANALYSIS METHODS FOR PYRAZINE-2,3-DICARBOXYLIC ACID SYNTHESIZED USING ELECTROCHEMICALLY REGENERATED KMnO4 ? RESEARCH ON NaCl SALINE AEROSOLS II. NEW ARTIFICIAL HALOCHAMBER CHARACTERISTICS ? DETERMINATION OF AEROSOLS POLLUTANTS ON MEMBRANES. 1. MEMBRANES PREPARATION AND CHARACTERIZATIO...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25660

As one of the very few countries using coal as its dominant energy resources, China has the coal production exceeding one thirds of in the world, added to it are the problems of environmental damages and soil resource destructions result from the solid waste, such as mining waste discharged in the process of coal production and fly ash deserted from the electric power plant etc. In this paper, the mineral ingredient of waste and fly ash was tested by X-ray Diffraction. Meanwhile, the deformation...
Autori: Yanli Huang, Jixiong Zhang, Qiang Zhang, Shoujiang Niehttp://www.ecozone.ro/reviste.php?RID=25677

An increasing recognition of tillage erosion processes has shown that soil redistribution by tillage directly contributes to soil loss in mechanically and nonmechanically agricultural areas worldwide. Soil translocation by tillage is normally measured by means of tracers, with which a volume of soil is labeled, and therefore yielding tillage erosion rates in a field. Two tracer methods for estimating tillage erosion rates were appraised to understand the adaptability to local conditions in the h...
Autori: Jianhui Zhang, Fucheng Lihttp://www.ecozone.ro/reviste.php?RID=25687

Slag-Fly Ash Based cementitious material materials with high volume of fly ash and slag and less cement clinker was prepared, with low water requirement, well fluidity and with high strength, and can be used to the preparation of High Performance Concrete (HPC). When the W/C is 0.36, the 28d compressive strength is 58.93 Mpa, 28d flexural strength is 14.26 Mpa. By XRay diffraction analysis (XRD) and Scanning Electron Microscope (SEM) analysis, the results show that main materials in grinded samp...
Autori: Chenghong Fu, Wen Ni, Hui Wu, Mingyang Tianhttp://www.ecozone.ro/reviste.php?RID=25708

Abstract:Under the circumstances of the deficit in total energetic resources of the Republic of Moldova, non-traditional sources as wind,solar and hydraulic energies are very opportune. Concurrently with the conventional energy resources (fossil fuels, atomic energyetc.), wind energy begins to regain its positions not only from ecological, but also from economical point of view. Also, the windenergy conversion systems could play a significant role in the production of mechanical, electrical ener...
Autori: Anatol Sochireanu, Ciupercă Rodion, Ion Bodnariuc, Ion Bostan, Ion Dicusară, Ion Sobor, Iulian Malcoci, Marin Guţu, Nicolae Trifan, Oleg Ciobanu, Radu Ciobanu, Radu Crudu, Valeriu Dulgheru, Viorel Bostan, Vitalie Gladîş
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25717

Abstract:Under the circumstances of the total energetic recourses deficit in the Republic of Moldova appears the problem of non-traditionalsources utilization. An important source of renewable energy is the wind energy. This paper deals with two new concepts ofvertical axis wind turbine (VAWT) with helical blades, elaborated by the authors.The main element of the wind turbine is, certainly, the rotor. It is directly subdued to the action of the air flow and transforms thekinetic energy of the ai...
Autori: Ion Bostan, Ion Vişa, Rodion Ciupercă, Valeriu Dulgheru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25722

Abstract:An efficient conversion of kinetic energy of river waters into mechanical or electrical energy without building barrages isprovided by micro-hydropower stations. Increased efficiency is achieved by an optimum position of the blades withhydrodynamic profile. The formulation used to compute the hydrodynamic forces is an inviscid - boundary layer model. Microhydropowerstation provides kinetic energy conversion of river water into mechanical or electrical energy without buildingbarrages. In...
Autori: Anatol Sochireanu, Ion Bostan, Ion Dicusară, Nicolae Trifan, Oleg Ciobanu, Radu Ciobanu, Valeriu Dulgheru, Viorel Bostan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25723

Abstract:A comparative analysis is drawn on the energetic responses numerically simulated for Brasov, Romania location, delivered bytwo mono-axial pseudo-equatorial STCs (solar thermal collectors): a flat plate STC and a STC with heat pipes; the two systemsare destined for future implementation on Transilvania University Campus. Accordingly, two tracking programs are consideredfor the diurnal motion: a) of 1h constant duration steps, for school courses interval (September-June) and b) 1-step pro...
Autori: Maria M. Vatasescu, Veronica E. Dombi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25740

Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

Abstract:The paper presents the virtual prototype of a robotic system for spray pyrolysis deposition (SPD). To design of the mechanicaldevice model of the robotic system, the MBS environment ADAMS of MSC Software was used, while the MATLAB/Simulink ofMathworks was used for the dynamic analysis of the robotic system, according to the mechatronic concept. A control loop waschosen, composed by a multi-body mechanical model, connected to the dynamic model of each motor. The main objective is toverif...
Autori: Cătălin Alexandru, Monica Enescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25744

Abstract:This technical paper presents some aspects concerning the static finite element analysis of a wind turbine blade. For themanufacturing of the blades for a 10 kW wind turbine elaborated at the Technical University of Moldova composite materialsmade up of polyester matrix reinforced with fiber glass are being used. In order to determine the mechanical properties of theproposed composite materials 10 different samples of laminated composite plates were numerically simulated in ANSYS 11....
Autori: Marin Guţu, Viorel Bostan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25747

Abstract:The concept of passive and low energy houses became fashionable in the last years and the European Parliament also initiated aproposal to build only near zero energy houses from 2018. The regulations already in force aim at low energy consumption (mostlikely influenced by the wide spreading of the �Passivhaus� concept in Europe) and by 2018 harmonized regulations andstandards will require the near zero energy building. According to the concept of the Energy Performance of Building D...
Autori: András Zöld, Tünde Kalmár
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25751

Abstract:It is of major importance that the mechanical structures and components of a photovoltaic (PV) system to have the same durabilityas the PV modules. The embodiment design process of the mechanical structure becomes significant as the results provide anoverall view of the PV system durability. The performance of the mechanical system must be attained based on functional andoperational requirements of the PV system. Therefore, the modelling and theoretical analysis of the mechanical behavi...
Autori: Bianca Butuc, Gheorghe Moldovean, Radu Velicu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25757

Abstract:The paper presents a method to improve the efficiency of a photovoltaic (PV) string by employing a mono-axis trackingmechanism. The tracking system was optimized so that it has minimum energy consumption during tracking. The PV stringsimultaneously changes the daily position using a linear actuator which transmits the motion to all modules by a rack-pinion gearmechanism. The system is designed in virtual prototyping concept with the following software solutions: for the solid modeling -...
Autori: Cătălin Alexandru, Nicoleta-Irina Tatu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25766

Abstract:The hereby article presents a part of the results of the research made by the author during his PhD degree preparation with respect to asbestos and plastics wastes recycling in the form of composite with polymeric matrix, respectively the toxicological tests performed on the new product. In this respect, three categories of tests were made based on complex and modern analysis methodologies, with high results accuracy: spectral analysis of the wear wastes, morphological analysis of the w...
Autori: Cristina Corpodean, Silvian Ionescu, Valeriu Deac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25812

This paper presents the physicochemical and rheological properties of some complex coagulants derived from the weak and medium anionic polymers and medium cationic surfactant in order to evaluate the opportunity to use them in destabilizing and removing the colloidal systems from water and wastewater. In this respect, weak anionic and medium anionic copolymers of acrylamide and sodium acrylate with commercial names of Preastol 2515 and Preastol 2540, and a medium cationic surfactant derived from...
Autori: Constantin Bobirică, Gabriel Dabija, Liliana Bobirica, Mihaela Mihai
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25850

The present study describes the preparation of a filtering medium from a polymeric cellulosic support (filter paper) by functionalization with monochlorotriazinyl-β-cyclodextrin. The permanent immobilization of cyclodextrins confers the new material special properties and the potential for a better decontamination of liquid and gaseous effluents. The structure, physicomechanical and filtration properties of the filter paper, successfully functionalized with MCT-β-CD, have been emphasiz...
Autori: Ana-Maria Grigoriu, Constantin Luca, Florin Ciolacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25862

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

The first edition of the International Conference„ECOIMPULS 2012- Environmental Research andTechnology” plans to open a conference seriesdedicated exclusively environmental issues. Thescientific topics are devoted to the on-going research onenvironmental topics regarding: „Environment – apolitical, economic and social responsibility”,„Water in a changing world”, „ZERO – waste cities”and „ Energy – beyond the conventional”.This scientific event aims to bring togetherprofessionals, academics, scie...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26015

AbstractThe objective of this paper is to investigate the effect of expansive soil treatment with Eco-Cement (EC) stabilizer, as beingcomposed of an alternative binder that partly substitutes the Ordinary Portland Cement (OPC). The extended use of EC in soilstabilization will carry several significant environmental benefits. Firstly the by-product resulted from the production of iron in ablast furnace will be reused, that otherwise will be stored on the ground in deposits representing an importa...
Autori: Anghel Stanciu, Irina Lungu, Mircea Aniculăesi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26069

AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

Abstract In order to accomplish the water quality standards required for a specific use, the continental surface water is treated through a sequence of operations and unit processes. The treatment technological flowsheets carry out, partially or totally, the removal of various pollutants, every treatment step being used for improving one or more qualitative parameter. The treatment scheme is specific to water source type and water use. One of the basic operations for water treatmen...
Autori: Oana Tirtoacă Irimia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26136

Abstract Agriculture is an axis of socio-economic development of the area of Denguele, Cote d’Ivoire. The evaluation of a project carried out as part of an agricultural campaign requires the handling of large amounts of heterogeneous data for effective monitoring. The design of an appropriate management tool is needed to organize and communicate information useful for decision making. The aim of this work is to provide a useful tool for a better management of information related to...
Autori: Arthur Brice Konan-Waidhet
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26137

AbstractDuring the normal operating of reservoir, the rock mass quality in hydro-fluctuation belt of reservoir bank will degrade graduallyunder the water-rock interaction because of the periodically impoundment and drainage. In this article, with the consideration ofthe change of water pressure, an experiment was performed to simulate the process of “immersion-air dry” cycles with sandstones selected from the hydro-fluctuation belt of Three Gorges reservoir area. Test results indicates that the ...
Autori: Huafeng Deng
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26161

AbstractRock dynamic mechanical characteristic is the basic information to study the damage of rock structures under dynamic loadsinduced from earthquake or blasting. A nuclear power plant site is a granite mountain of the same active tectonic period. Dynamic triaxial compression experiments need to be conducted on the drill cores of different project parts according to the design requirements. These drill cores were formed in the same active tectonic period, but as a result of the different bur...
Autori: Liu Bo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26163

AbstractThermal behaviour, microstructure and mechanical properties of the clay polluted by acidic and alkaline pollutants wereinvestigated by thermogravimetric/differential thermal analysis (TG-DTA), scanning electronic microscope (SEM), mercuryintrusion experiments, permeability coefficient and unconfined compressive strength tests. The clay polluted by alkaline solutionpresented distinct exothermic peaks at 304-310oC, while it’s not observed for the one polluted by acidic solution due to thed...
Autori: Zhao Ying
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26182

AbstractThe paper analyses the opportunity of recycling sewage sludge in the manufacturing of ceramic building materials. Wastewatertreatment plants (WWTP) produce annually a great volume of sludge and its processing become more difficult. On the otherhand, there is an increased need to develop new alternatives beyond the already known methods. The use of WWTP sludge asraw material for the production of bricks may become an interesting alternative, both from an industrial and environmental point...
Autori: Anna-Maria Szőke
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26251

AbstractThe main objective of this study is to investigate the utilization potential of oil well-derived drilling waste (DW) in the firedshale-brick production. Different mixtures were suggested for the experimental work with the DW content varying from 20% to40%. The prepared briquettes from different mixture were fired at a temperature ranging from 950°C to 1050°C for 1 h, with aheating rate of 2~3°C /min. Water absorption, apparent porosity, bulk density, weight loss by ignition, firing shrin...
Autori: XiangGuo Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26269

AbstractThis paper describes the model for forecasting the exposure risk of workers to global occupational vibrations. The research hasbeen achieved within the PN 07 45 01 18 Project in the framework of the NUCLEU/2012-2013 Program. This project has anational and European interest, entailing the increase of occupational health and safety level and ensuring sustainableenvironmental quality and comfort at workplaces.The scientific novelty is given by the complex and interdisciplinary aspect of the...
Autori: Gabriel Dragoş Vasilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26409

EDITORIALA SPECIAL ISSUE DEDICATED TOSUSTAINABLE TECHNOLOGICAL DESIGN AND OPTIMIZATIONFOR GREEN MECHANICAL AND ENVIRONMENTAL ENGINEERING...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26421

AbstractRolling bearings are one of the most commonly mechanical elements used in the construction of dynamic equipment. Thiselement can be considerate as a noise source as a result of relative motion of the components from their construction: rings,rolling elements and cage. The noise level increase with the increase of the roller bearings wear. By analyzing of the rollerbearings wear level, which appear due to the component failure, it can be determine the deterioration stage and their remaini...
Autori: Dumitru-Cristinel Nadabaica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26430

AbstractUnderground space represents an area with multiple management problems, mainly related to water resources management,difficulties for new underground constructions (as diaphragm walls, tunnels, dewatering systems etc.), interpretation of hydrogeologicaldata or influence of the new constructions on the existing ones. The management of this area is even more difficultdue to the multitude of works, of the (sometimes) chaotic development, of the poor legislation, various ownerships of the la...
Autori: Loretta Batali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26449

AbstractThe objective of this study is air pollutants discharging on active centers, depending on its relative electric permittivity, effectivein thermal, chemical and mechanical hydrogen relaxation enabling the fastest velocity of pollutant heat transport. The diagnosticsof relative electric permittivity is carried out on the basis of the daily pollutants mass concentration monitoring results, in sixthday period in the various seasons and locations in Romania and Serbia. The monitoring results ...
Autori: Milan Pavlović
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26507

AbstractThe aim of this work is to study the valorisation of two regenerated low density polyethylene (LDPE) coming from dirty wastesby blending with polypropylene (PP) in presence of compatibilizer. The first step was the determination of the physico-chemicalproperties of the two regenerated samples (density, melt flow index, water absorption, melting temperature and oxidation index)and the mechanical properties (tensile and shore D hardness).The second step was the characterization of the phys...
Autori: Nabila Guerfi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26565

Abstract Carbon capture and storage is one of the critical technologies that can enable the reduction of carbon dioxide (CO2) emissions of large industrial sites worldwide. The injection of CO2 into saline water formations is related with many factors and processes that control the safety of its long-term storage. This paper analyzes the leakage risks and the factors that influence the integrity of the cap rock in deep saline aquifer formation. Several pathways have leakage potential risks d...
Autori: Xiaojuan Qiao
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26585

Abstract The biological removal of organic matter from a cosmetic wastewater by sequencing batch reactors has been optimized by analyzing the influence of the hydraulic retention time as well as the inclusion of anoxic and/or aerobic stages in the process sequence. Hydraulic retention time of 5 d led to the highest total organic carbon and chemical oxygen demand removal regardless the sequence used. Although a completely aerobic sequence can be used for cosmetic wastewaters treatment, the al...
Autori: Montserrat Tobajas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26589

Abstract The deterioration of the natural polymers is a very complex process, and a problem that can be best addressed through modelling. The approach for modelling the rheological behaviour of different cellulose-based textile fibres (cotton, hemp, flax) when subjected to a hydrothermal treatment, followed by exposure to different doses of gamma-rays (5, 10, 15 and 25 kGy) is presented here. In order to predict the optimum radiation dose limit and hydrothermal aging time, the mathematical m...
Autori: Angelica Olaru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26678

Abstract Wind erosion, which strongly affects both plant and soil development in arid environments, is dependent on soil properties, wind characteristics and plant cover. In a semiarid zone in SE Spain, a new technique consisting of dusting plants with a forced wind stream reduces tillage and significantly increases productivity. By using a blower once a year, dust is raised and partly retained by plants, and eventually ends up in the understory. To assess the influence of this technique on ...
Autori: Carlos Asensio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26735

Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

Abstract Sustainability issues have driven academic researchers towards the definition of methodological tools to assess the impacts derived from products and services and to make them more ecologically friendly, economically profitable and socially suitable, and whose results have to be clear and understandable to a broad public. In the evaluation of complex socio-environmental systems, like agricultural ones, uncertainty often arises and the quality of decision processes can be a high conc...
Autori: Anna Irene De Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26779

Abstract Recently several innovative suggestions on how industrial wastes can be utilised in new products have been presented in literature, e.g. as filler or additives in concrete, incorporated in ceramic materials to produce glass-ceramics and pavement construction. In this work, metallurgical materials from secondary aluminium scrap processing and glass waste derived from treatments of packaging and fluorescent lamps were considered for fabrication of new ceramic materials using powder te...
Autori: Rosa Taurino
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26794

Abstract The amount of bottom ash produced in Italy from municipal solid waste incinerators is estimated at over a million tons per year. Up to now, it has almost all been disposed of in landfills. Therefore, large profit margins, from both the economic and environmental standpoint, can be expected from the recovery of this material, or at least from a fraction of it. In this study, a rapid procedure for the recovery of different bottom ash fractions based on mechanical sorting and aging was...
Autori: Ivano Vassura
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26853

Abstract This paper analyses mass and energy balances of some Integrated Municipal Solid Waste Systems (IMSWS) focusing on MSW sorting, treatment and energy recovery conversion chains suitable for the last entries into the European Union (EU). In particular the Romanian case-study has been developed as reference scenario. In this context the actions timelines for the case-study are immediate (S1A), midterm (S1B) and long term (S2). In the scenarios S1A, S1B a poor selective collection (SC) i...
Autori: Gabriela Ionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26878

Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

Abstract The present study was designed to determine the sound effects of ultrasonic treatment and the biologically mediated extraction of uranium from low grade black shale. Low grade uranium was subjected to fungal treatments assisted by sonication by conventional methods. In situ fungal leaching of black shale with different fungal strains in the presence of molasses as growth substrate resulted in highest leaching yield of uranium by Phoma tropica (57.73%) compared to Penicillium chrysog...
Autori: Fozia Anjum
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26919

This paper studies, in lab scale, the possibility of removing a rich-in-pollutant soil fraction using flotation, with the clean fraction been restored to its natural condition. The tests were carried out in a conventional flotation cell with mechanical agitation. Artificially polluted soil was used throughout this study by mixing soil with diesel fuel. The effect of the following flotation factors was studied: pulp pH, collector type and quantity, conditioning and flotation time, initial soil...
Autori: Nickolaos Georgiou
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26960

Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

Biomass is a very important source for the production of biofuels. During the hydrolysis step of the process for obtaining biofuels the rate of decomposition of biomass is strictly related to its organic matter content and the operating mode of the facilities. This paper highlights the effect of different pretreatments on the composition of biomass at the molecular level using Fourier Transform Infrared Spectroscopy (FTIR) and Principal Component Analysis (PCA). For this experiment, a mixture...
Autori: Andreea Cocarcea Rusei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26986

High contents of colloidal and organic materials in municipal wastewater sludge cause problems in the process of dewatering. The filtering efficiency can be improved by chemical conditioning, but the effectiveness of mechanical dewatering is limited because flocculated sludge is highly compressible. Physical conditioners such as bagasse can be used to facilitate mechanical dewatering. This paper describes the use of bagasse pith (cane sugar waste fiber) to improve the dewatering process of mu...
Autori: Nematallah Jaafarzadeh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26995

Over the past three decades, nickel–titanium engine-driven files have become instruments “sine qua non” for root canal treatment. They are increasingly used by dentists to facilitate the cleaning and shaping of root canals, during the mechanical treatment phase in endodontic therapy, increasing not only the speed of the treatment but also assuring a proper shape of the canal preparation. During the repeated use of these instruments, separation of the file occurs. It has been...
Autori: Teodora Stefanescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27024

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

In the current context, when studies regarding the planet’s ability to sustain the human species consumption present more and more grim scenarios, it is required, more than ever, to consider sustainable development as a main priority for development strategies worldwide. In this sense, reducing the negative environmental impact of building materials and lowering energy consumption in buildings exploitation becomes the main axis for most of the new tendencies in architecture and civil e...
Autori: Marian Pruteanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27040

This work was aimed to test the suitability of an epoxidized cardanol derived plasticizer for the production of soft PVC characterized by low environmental and toxicological impact soft PVC. Nowadays, the use of natural derived plasticizer in soft PVC industry is emerging as valid alternative towards conventional phthalate plasticizers, in order to reduce the environmental and toxicological impact of soft PVC. In facts, cardanol is a natural and renewable resource, characterized by a wide wor...
Autori: Antonio Greco
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27128

This paper examined some physical and mechanical properties of wood from thin trees of sessile oak collected from thinning operations, in order to recommend this secondary wood resource for potential superior applications (as solid wood panels and furniture components). Swelling, shrinkage, modulus of rupture (MOR) and modulus of elasticity (MOE) and compression strength parallel to the grain were examined and compared with data from literature reported for mature trees. The variation of the abo...
Autori: Alin M. Olărescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27210

In this paper photo-oxidative degradation of degradable mulching films was studied. Low-density polyethylene (LDPE) films were denominated as 3# and 4# (containing 3.43% and 0.44% degradable masterbatch, respectively), They were exposed to different irradiation condition of i: ultra violet A irradiation (UVA), ii: ultra violet A and B irradiation (UVA-B), both at 58±2°C. The physical chemical property of the plastic film is influenced by factors in many aspects, especially the composi...
Autori: Ya-xi Huang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27232

The aim of the present work is to investigate the effect of marble waste fillers incorporation on the mechanical properties of Recycled Aggregate Concrete (RAC). The RAC studied mixes were 0, 5, 8 and 10% (by weight of cement) of marble fillers respectively. Direct tests of compressive and flexural strength and non-destructive testing (NDT) (rebound hammer, ultrasonic) were performed. The optimal content of 5% marble fillers showed an improvement for both used test methods (compression, flexion ...
Autori: Larbi Belagraa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27240

After the entry into force of Landfill Directive 1999/31/EC the member states of European Union (EU) turned towards other technologies for waste treatment and management, such as mechanical-biological treatment of waste (MBT) in order to meet the obligations related to the reduction of the amount of landfilled biodegradable waste. This paper presents an analysis of the waste management in Poland in terms of the current regulations and requirements of the EU and achievement of the mechanical - bi...
Autori: Monika Suchowska-Kisielewicz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27266

Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

The experimental results of studies on cement concrete with fly ash and metallic fibers are presented and are compared with a control mix. In the tested mixes five dosages of cement replacement with fly ash and two dosages of metallic fibers were considered. Mechanical characteristics such as compressive, flexural and split tensile strengths were experimentally determined. Tests results had shown that fly ash as replacement of cement generally reduced the mechanical strengths of concrete. In the...
Autori: Adrian Alexandru Șerbănoiu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27307

This paper presents some experimental results regarding mechanical behaviour at shear cutting Miscanthus x giganteus stem with an oblique blade of different edge angles. Experimental determinations were performed using samples of about 30 mm in length and a medium diameter of about 6.3 mm to 8.9 mm. The biomass was cut with three bevel cutting blades of 30 degrees, with a tool angle of 10, 30 and 50 degrees, fitted on an equipment used for mechanical experiments type Hounsfield, with a working s...
Autori: Georgiana Moiceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27317

The objective of this study was to develop a naturally dyeing process of 70% wool /30% Angora mohair blended yarns by using bio-mordants as an environmentally friendly alternative for the conventional metallic salts. Bio-mordanting operation was achieved by using of condensed tannin extract from quebracho bark trees. Conventional mordanting has been performed using the conventional mordants like copper sulphate and tin chloride. Another specific objective of this study was to investigate the pos...
Autori: Ioana Stanculescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27337

During the development of an underground explosion phenomenon, due to the energy of dynamic wave, important mechanical effects are registered both in the affected mine workings and in ventilation constructions (stoppings and seals, ventilation doors, regulators and air crossings). An explosion directly affects the ventilation network by modifying specific operational parameters of the main fans. This creates a different natural post event repartition of the air flows, at the branch level. In or...
Autori: Marius Cornel Șuvar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27367

The main objective of this study was to investigate the potential utilization of polyethylene terephthalate PET waste in cementitious matrix, as substituent to cement, to develop lightweight construction materials and for preventing chemical attacks or repairing various reinforced concrete structures. Composites containing different amounts of PET particles, as partial replacement to cement by weight, were characterized by destructive and non-destructive testing. So, the thermal conductivity, ul...
Autori: Ahmed Soufiane Benosman
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27381

• EXPERIMENTAL INVESTIGATION OF TEMPERATURE EFFECTS ON THE PARAMETERS OF PHOTOVOLTAIC PANELS    • CONCENTRATIONS OF CHROMIUM, CADMIUM AND NICKEL IN TWO CONSUMED FISH SPECIES OF PERSIAN GULF, IRAN    • IMPROVING THE ENERGY EFFICIENCY OF RESIDENTIAL BUILDINGS BY USING A DRAIN WATER HEAT RECOVERY SYSTEM    • ASSESSMENT OF METAL CONTAMINATION AND ECOLOGICAL RISK IN URBAN SOILS SITUATED NEAR A METALLURGICAL COMPLEX    • FINANCIAL DE...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27398

EXPERIMENTAL INVESTIGATION OF TEMPERATURE EFFECTS ON THE PARAMETERS OF PHOTOVOLTAIC PANELS    • CONCENTRATIONS OF CHROMIUM, CADMIUM AND NICKEL IN TWO CONSUMED FISH SPECIES OF PERSIAN GULF, IRAN    • IMPROVING THE ENERGY EFFICIENCY OF RESIDENTIAL BUILDINGS BY USING A DRAIN WATER HEAT RECOVERY SYSTEM    • ASSESSMENT OF METAL CONTAMINATION AND ECOLOGICAL RISK IN URBAN SOILS SITUATED NEAR A METALLURGICAL COMPLEX    • FINANCIAL DEVELOPME...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27399

End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

Nowadays, the polyolefins (polyethylene, polypropylene) are increasingly consumed in large amounts for many applications. This issue causes a concern regarding the environmental impact of the waste materials generated after the first use. Mechanical recycling of polyolefin wastes helps to conserve oil and gas resources and reduce the polymeric waste accumulation in environment. In this paper, the modification of some post-consumer polypropylene (rPP) properties coming from packaging processi...
Autori: Maria Râpă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27493

This study focuses on some mechanical properties resulted from the tensile testing of a set of green composites with a Dammar-based matrix and reinforcement material of silk, flax, cotton and hemp fabrics. To be precise, we have ascertained the characteristic curve, the resistance to and the elongation at fraction, as well as the modulus of elasticity for each set of samples from these composites and for a set of bioresin samples. With the help of an Electronic Scanning Microscope we captured im...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27516

Recycling of battery components for natural resources sustainability and consumer products has become an important endeavor that demands continuity through effective processes. In compliance with the need for waste management, LiMn1/3Ni1/3Co1/3O2 in the positive electrode of spent lithium-ion batteries has been recovered using specially designed device, consisting of two compartments separated with a plastic sieve of pore size 0.2mm. The upper compartment equipped with a mechanical stirrer conta...
Autori: Oluwatosin Emmanuel Bankolehttp://www.ecozone.ro/reviste.php?RID=27581

This paper presents the results of experimental tests on polymer concrete prepared with different wastes. Two types of polymer concrete mixes were compared. The control polymer concrete was obtained with epoxy resin, natural aggregates in two sorts (0-4 mm and 4-8 mm) and fly ash waste used as filler. To the control mix, both sorts of natural aggregate were replaced in different dosages by polystyrene granules waste. The influence of polystyrene granules as substitution of aggregate on density, ...
Autori: Andrei Burlacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27599

Polycyclic aromatic hydrocarbons (PAHs) are very hazardous compounds. This investigation is the third in a series of three experiments carried out in conventional wastewater treatment plants with regard to PAHs. The first experiment regarded the analysis of PAHs in a municipal wastewater sewage system and in the wastewater treatment plant (WWTP) effluent, followed by a comparison between the observed removal efficiency and FATE model (US-EPA) predictions. The second experiment was carried out in...
Autori: Vincenzo Torretta
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27629

The paper describes the main results from a study of cement bound mixtures for road foundations with the aggregate matrix consisting of industrial wastes, i.e. foundry sands (FS), electric arc furnace (EAF) steel slags and bottom ash from municipal solid waste incineration (MSWI), combined in five different proportions. The laboratory investigation involved a preliminary analysis of the chemical, leaching, physical and mechanical properties of the industrial wastes, followed by a mechanical char...
Autori: Marco Pasetoo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27645

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

Influence of soil pH on the mechanical characteristics of glass reinforced plastic (GRP) pipes type was often investigated in different situations encountered in the field. GRP degradation is directly proportional to the exposure to soil with non-neutral reaction. The theoretical and experimental results lead during time to design standards, which allow the application of GRP pipes in water and soil, so as minimum interferences with the materials used in the manufacture of pipes would appear. Sa...
Autori: Ana Diana Ancas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27768

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

This paper focus on how prefabricated building systems can allow the implementation of deconstruction strategies. Prefabricated mechanically fixed components, in comparison with conventional concrete and brick in situ construction, can be more easily separated during demolition, allowing its reuse, and even if this is not possible, at least allowing the recycling or the energetic recovery. It is very important that construction practitioners understand the benefits of the prefabrication. As a wa...
Autori: Joăo Pedro Couto
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27739

According to recent estimations, the total yearly amount of end-of-life tyres (ELTs) arising in Europe exceeds 3 million tons; more than 95% are managed through mechanical and thermal treatments because ELTs represent a useful resource both of materials and energy. For this purpose, the goal of the present work is the assessment of the environmental impacts of a novel pyrolysis process and the comparison with alternative ELTs valorisation or disposal scenarios. Life Cycle Analysis (LCA) methodol...
Autori: Esmeralda Neri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27798

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

This paper exposes the research activities regarding REBAF (Energetic Recover of River Biomasses) project, focused on the maintenance operations self-sustainability of the Secchia river (Italy). Poplar was found as the most abundant and representative wood plant of Secchia riverbanks, with a good behavior during gasification process: from 1 hectare of maintenance every three year, it was possible to produce 23 MWh of electrical power and 31 MWh of thermal power. The biochar obtained was characte...
Autori: Vittorio Vezzali
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27804

In this study, the effect of raw material formulation used in the core layer on the water resistance and mechanical properties of particleboard made from a mixture of rice husk and wood particles was investigated. For this aim, four series of particleboard core layer were produced from different proportions of rice husk/wood particles, different amounts of urea-formaldehyde (UF) adhesive, low density polyethylene (LDPE), and maleic anhydride grafted polyethylene (MAPE), respectively. The amounts...
Autori: Jin Heon Kwon
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27871

The aim of this paper was to investigate the possibility of incorporation non-metal fraction (NMF) in concrete products as a substitute for aggregate on industrial scale, while other studies are mostly based on NMF incorporation in concrete only on laboratory scale. Mineral filler was supplemented with 5, 10, 15 and 20 wt.% NMF from waste printed circuit boards (WPCBs) and its influence on concrete quality was assessed based on compressive and tensile strength conducted on laboratory and indust...
Autori: Vitomir Premur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27857

In this paper a two stage bench scale leaching procedure is used to assess the heavy metals release from a wood-based fly ash of a 5.0 MWth grate-fired boiler. In the first step mostly K was leached with water. In the subsequent acid leaching step heavy metals were leached at a pH of 3. The remaining solids were agglomerated together with the bottom ash and the dried K-concentrate from the first leaching step whereas the filtrate was treated before discharge. In the agglomerates produced the ...
Autori: Christof Lanzerstorfer
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27875

For assessing the intrinsic safety to mechanical sparks, two dedicated methods are implemented in testing laboratories and further used for the conformity assessment of products with regard to explosive atmospheres ignition, namely: impact test and friction test. The purpose of the article is to present the results obtained by using the first method mentioned, results which shall be applied in further research for comparison with the ones resulting from the friction test. The article presents...
Autori: Adrian Marius Jurca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27957

The influence of the piston effect in subway tunnels depends on a train speed, the geometry of a tunnel and a train, the types of air flow caused by mechanical ventilation and other variable characteristics. Tables and graphs of changes in air flows generated by the effect of the piston are presented depending on the speed of a train and the degree of fill rate of a tunnel. It is noted that the piston effect is characterized by two phases. At the first stage, the piston effect and the process...
Autori: Omar Lanchava
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27959

The paper presents the experimental results obtained on cement concrete with different types of waste and the analysis of their effects on density, compressive strength, flexural strength and splitting tensile strength. The tests results were compared with a control mix without aggregate substitution. The fly ash was used as replacement of cement and polystyrene granules, chopped plastic bottle (PET) and wood waste were used as substitution of 0-4 mm aggregate sort in different dosages from 0% t...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27978

This study evaluates the environmental impacts of four types of frozen food packages throughout their lifecycle and suggests strategies for reducing their related environmental impacts. The four most widely used frozen food packaging materials were chosen for this study: (1) pouches composed of low-density polyethylene (LDPE) film; (2) pouches composed of polyethylene terephthalate (PET) and LDPE film laminate; (3) cardboard boxes coated with LDPE; and (4) multipackage composed of cardboard boxe...
Autori: Daina Kliaugaite
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27979

In this paper, we determined some mechanical properties of a new category of green composites, based on tensile tests. More precisely, we selected a set of samples from a new bio-resin based on Dammar and two sets of samples from green-composites with matrix by bio-resin and reinforced with almost compact layers of Typha latifolia or Schoenoplectus lacustris. For these built materials, we obtained the characteristic curve, tensile strength, percentage elongation after fracture and elasticity mod...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27980

This study presents the influence of the storage recipients’ material and of the use and the type of stirring on the drinking water quality. The kinetics of drinkable water quality alteration under stationary conditions and under magnetic and sonical stirring have been monitored for a two weeks period. The microbiological parameters (total number of germs developed at 37°C and 22°C, lactose-positive and lactose-negative bacteria, coliform bacteria and Echerichia coli), as well a...
Autori: Laura Damian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27999

Hydrocarbon spillages are an increasing problem in Mexico, which has left large areas of contaminated land that entail negative effects on environmental, economical and social aspects. Such soil contamination demands fast, efficient and cost-competitive remediation technologies. This work explores activated carbon (AC) adsorption as a fast soil treatment to lower hydrocarbon concentrations in a contaminated soil from Puebla, Mexico, reusing an AC residue for such purpose. Both, semi-wasted AC an...
Autori: Sandra Arroyo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28055

Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

This manuscript presents the bicriteria optimization of a polygeneration system to be installed in a tertiary sector building, considering economic and environmental objective functions. Electricity, hot water, steam, and cooling demands were considered. The bicriteria problem considered the annual costs and the annual carbon footprint. Updated environmental information was obtained through the application of the Life Cycle Assessment methodology and implemented within a Mixed Integer Linear Pr...
Autori: Bruno Campos Teixeira de Carvalho
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28103

There are considerable environmental and health and safety concerns regarding liquid crystal display (LCD) waste glass because of the waste electrical and electronic equipment (e-waste) that is deposited in landfills. In current study, the effect of variation in LCD waste glass on the deconvoluted fractions of silicon centers of metakaolin geopolymers has been comprehensively investigated to discover the underlying mechanisms governing the performance. Solid/liquid ratio affects the kinetics of ...
Autori: Kang-Wei Lo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28146

In this work, the removal of methyl orange (MO) and Cd2+ by simultaneous adsorption on adsorbent obtained from modified charcoal (BCBH) coated with TiO2 has been studied. The synthesized materials obtained from wood branches were characterized using atomic force microscopy (AFM) for the roughness and SEM to determine the morphology of the surface. EDX spectroscopy indicates the presence of C, N, O, Na, K, P and Ti on the surface of the adsorbent materials. The micro-porosity and BET specific sur...
Autori: Nicoleta Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28157

The paper covers the results of a study, carried out during 2005 and 2018, regarding the impact of sludge dump of a wastewater treatment plant from Iasi city, Romania, on the soil characteristics. Experimental research was conducted to highlight the evolution of the heavy metal content of both the material in the storage site and the soil in its proximity. The following heavy metal concentrations were analyzed with atomic adsorption spectrometry method: Zn, Ni, Cr, Pb, Co, Cu and Cd. Research ha...
Autori: Georgiana Cezarina Bartic Lazăr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28164

Inorganic ceramic materials is receiving more attention in recent times due to their unique characteristics which include different pore structures, hydrophilic surfaces, high chemical, thermal and mechanical stabilities that offer avenues for application in water treatment. In the present work, cost-effective clay ceramic water filters of different designs were developed from clay (50, 60, and 70) %, sawdust (15, 20, 25, and 35) %, grog (5, 10 and 15)% ratios plus 5% bone char by volume and ...
Autori: Enyew Amare Zereffa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28196

Nine samples of recycled acrylonitrile butadiene styrene (ABS) with organic montmorillonite and fire retardants adding were combined to prepare ABS copolymer nanocomposites. A very good dispersion of clay and fire retardant was noticed in the recycled ABS (reABS) matrix. The effect of montmorillonite and fire retardants on the mechanical and thermal properties of the reABS nanocomposites was further investigated. Experimental results showed that the addition of organic montmorillonite increased ...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28203

The paper analyses the possibilities of recycling tannery sludge (TS) in clay brick manufacture. The physico-mechanical properties and microstructure of clay brick and cement mortars vary depending on TS content in the mix. 2.5 %–15.0  TS (by weight) was added to clay bricks fired at 1000 C temperature and maintained at maximum heat for 1 hour. The tests revealed that 2.5  TS addition had a positive effect on physical and mechanical properties of clay brick: reduce drying and mfi...
Autori: Olga Kizinievič
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28209

Three scenarios for the management of Municipal Solid Waste (MSW) produced in the study area of Bari (Southern Italy) were defined and evaluated in terms of separately collected material and fate of the residual fraction. The first scenario represented the bring points MSW separate collection system in the current configuration with a collection rate approx. 40%. The second scenario considered the study area in the optimal configuration, with a percentage of separate collection > 80% obtaine...
Autori: Sabino De Gisi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28293

Every year 93 billion tonnes of raw materials are consumed, but only 9% of them are reused: a potential of about 3 trillion dollars worldwide, 88 billion in Italy, according to Growth Within: A Circular Economy Vision for a Competitive Europe by Ellen MacArthur Foundation with McKinsey. A vehicle is potentially recoverable, in its components for more than 95%, an industrialised process of treatment of end-life vehicles (ELVs). Optimising raw material recovery is currently possible and advantag...
Autori: Luca Pomili
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28295

Brominated flame retardants (BFRs) are used in different types of products such as plastic, textiles and electronic circuits with the aim to increase fire resistance and to avoid or to delay the propagation of accidental combustion. However, high concentrations of bromine in waste from electrical and electronic equipment (WEEE) hinder the possibility of their use as secondary raw materials. Furthermore, the possibility that BFRs can be released during mechanical recycling processes, imposes the...
Autori: Giuseppe Bonifazi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28296

Plastic and circular economy are key words that characterize our present and seek to address the future of the global social economic system. Plastic, on the one hand, is the emblem of modern times, a low cost material with unparalleled functional properties. Circular economy, on the other hand defines an alternative model to traditional economy that focuses on sustainability. In this work, the author presents a case study relating to a virtuous example of circular economy applied to the industr...
Autori: Leonardo Mita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28301

The steady increase in separate waste collection has highlighted the urgent need to adequately deal not only with urban waste (differentiated and undifferentiated) but also with special waste produced by separate waste collection and recycling processes. Source collected municipal solid waste produces different waste streams. One of this is the organic fraction of municipal solid waste (OFMSW). This fraction is central for circular economy, since it can be further transformed in order to recove...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28302

This study analysed the recycling of debris derived from the partial and selective demolition of concrete structures of Sant’Elia Stadium in Cagliari (Sardinia, Italy). This recycling was carried out to obtain coarse recycled aggregates for the production of recycled concrete. The experimental investigations demonstrated the possibility of using these recycled concrete aggregates in structural concrete and in precast concrete element, with unchanged production processes and suitable mechan...
Autori: Luisa Pani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28307

At present, the production of oily sludge is huge, and the micro-emulsion method can effectively separate crude oil and water from the oily sludge by reducing the interfacial tension between oil and cement. In this paper, the micro-emulsion was prepared by using surfactants, such as sodium dodecyl benzene sulfonate (SDBS), cetyltrimethylammonium chloride (CTAB), sodium dodecyl sulfonate (SDS), sodium cetyl sulfate (CAS), and alkylphenol polyoxyethylene ether (OP-10) as the main raw materials. T...
Autori: Lanlan Yu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28344