Actual trends in papermaking concern on the use of recycled fibers and minimizing effluent volume by closing water circuit. Beside environmental and economic advantages, both trends can lead to serious problems in papermaking processes due to contaminants introduced with recycled fibers and their accumulation in closed water system. A key factor to avoid disturbances in the papermaking is to prevent the accumulation of detrimental compounds. In this respect, first it is necessary to find out met...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25134

Contain all the articles from this issueICEEM/02 - ENVIRONMENTAL ENGINEERING SECTION"Treatment Technologies for Gaseous Fluxes"Surface chemistry studies on molybdena–alumina catalystTatiana Yuzhakova, ?kos R?Šdey, Endre Domokos, J??zsef Kov??cs, Monica Caldararu, Cristian Hornoiu, Mariana Carata, G.Postole, Cornel Munteanu, Larisa Strukova, Jozse FazakasHebicidal behaviour of a new N,N'- biquaternary salt of 4,4'- bipyridineServilia Oancea, Marinela Irimia, Gabriela Carja, Anton Airinei, Nicu...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25189

AbstractAdvanced closing of paper machine circuits results in the accumulation of the dissolved and colloidal substances (DCS) in the process water. At a critical concentration, the DCS are destabilizing even by small variations in paper machine parameters, producing operational and product quality problems. This article presents results of lab experiments simulating the process water recycling in short circuit of paper machine, without and with addition of fixing agents. Tests were performing w...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25261

AbstractPulp and paper mills generate various quantities of energy-rich biomass as wastes, depending on technological level, pulp and paper grades and wood quality. These wastes are produced in all stages of the process: wood preparation, pulp and paper manufacture, chemical recovery, recycled paper processing, waste water treatment. Energy recovery from wastes of different origin has become a generally accepted alternative to their disposal. Pulp and paper industry expresses an interest in adap...
Autori: Dan Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25307

AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

AbstractSolid waste management problems proved to be complex in origin and in solution. The rapid economic development and population growth experienced by the State of Penang, Malaysia have resulted in a tremendous increase in the quantities and types of solid wastes generated. Domestic solid waste is the most visible consequence of this economic development. However, considerable amounts of this waste could be recycled and reutilized if separated. This paper reviews the current status of solid...
Autori: Abdelnaser Omran, Abdelsalam O. El-Amrouni, Abdul Hamid Pakir, , Latifa K. Suliman, Mahyuddin Ramli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25353

AbstractAn experimental three-stage subsurface flow constructed wetland system was investigated for the removal of nutrient and organic matter from primary-treated domestic wastewater. Built in the Turkey Scientific and Technical Research Council-Marmara Research Center, Gebze, Turkey (Istanbul), the system consisted of a vertical flow-gravel filtration in the first stage, a horizontalsubsurface flow bed vegetated with Iris in the second stage, and a vertical-subsurface flow bed vegetated Phragm...
Autori: Bilal Tuncsiper
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25358

â€? Bioremediation of contaminated air using a bioscrubberâ€? Quality risk evaluation of the groundwater resources on the moldavian areaâ€? Electrochemical characterization of some dental materials in accelerated environmental testingâ€? Preliminary study of simple and Fenton oxidation with hydrogen peroxide applied on final effluents from a zootechnical farmâ€? The environmental impact assessment caused by the dykes failureâ€? Revaluation of beer industry byproducts – medical implicationsâ€? ...
Autori: http://www.ecozone.ro/reviste.php?RID=25372

� Physiological changes in seedling germination and growth plant under chemical stress conditions� Studies on sorption and transport processes of cadmium in soils� Assessment of the anthropogenic impact on water systems by fluorescence spectroscopy� Research on the effects of soil improvement by fertilization on the quality of winter wheat� Halotherapy: From ethnoscience to scientific explanations� Study regarding the sorption of erythrosine from aqueous solution onto soil� Hydroxy...
Autori:
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25375

Abstract The paper presents the preliminary experimental results performed at laboratory scale set-up for different combined mechanochemical treatments of final effluents from a zootechnical farm from the central Moldavian region of Romania. Because of the high content of pollutants into wastewaters, the soil can be polluted and also the ground waters. To avoid this soil pollution episode, some combined mechano-chemical processes were studied and applied into a specific technological order as...
Autori: Carmen Zaharia, Mioara Surpăţeanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25434

Abstract This study examined the effect of hexane concentration in the inlet gas stream on the treatment performance of a concentric tube internal loop airlift bioreactor with a 7 L capacity, inoculated with a strain of Pseudomonas aeruginosa. The experiments were conducted employing hexane-contaminated air, in 0.62, 1.26, 2.15 and 4.5 g/m3 concentrations at 29 ¹ 1°C. The 100% hydrocarbon removal was verified when effluents containing 0.62 and 1.26 g/m3 of hexane were employed. Under contin...
Autori: Fernando Jorge Santos Oliveira, Leonardo Vazquez, Francisca Pessoa de Franca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25437

Abstract The waste recycling done in order to obtain composite products with performant properties and also, with long life cycle is the main purpose for the sustainable development. The present paper describes the way in which, different kind of solid wastes are immobilised in an organic resin as a binder matrix. Composites with different proportion of waste as, rubber/plastic, glass and silica sand have been obtained. The physical-mechanical properties and chemical stability of such organic...
Autori: Ioan Ropota, Emilia Zamfirache, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25450

Abstract This work presents a global approach of the impact generated in the environment by rubber processing activity. The objective analyzed as a case study is a company that produces rubber tires for trucks and industrial vehicles. The experimental part includes the determination of quality indicators for each environmental factor (air, water, soil) and the evaluation of environmental impact on these factors. Determination of the environmental quality indicators was done by sampling and a...
Autori: Aurica Grec, Florin Dumescu, Corneliu Maior
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25547

Abstract In Europe, recovered paper is a valuable raw material for the paper industry already since the early 20th century, actually corresponding to half of the total use of fibres for paper and board production. The aim of this paper is to describe the present status of paper recycling in Europe and thereby to create a data basis for evaluation the results of the FP7 project ?Recovered Paper Sorting by Innovative Technologies ? SORT IT. The overview is based on specific questionnaires addre...
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25579

This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

AbstractWastewater from butyl rubber production is causing an increasing environmental problem due to its large quantity and complexquality. In this paper, two types of wastewaters generated from rubber synthesis, i.e. alkaline wastewater (AW) and cleaning andflushing wastewater (CFW), were investigated. Coagulation and flocculation were firstly applied to remove suspended solids(SS) from the AW. By single factor experiment, the optimum operational conditions were obtained as pH 8, PAC dosage 40...
Autori: Lujun Chen, Rui Liu, Wei Li, Wei Zheng, Yan Zhang, Ying Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25950

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

AbstractThe evaluation of the environmental impact of transport infrastructure entails a complex characterization of factors, attitudes andconsequences. In the frame of an ecologically friendly approach, sustainable alternatives and solutions for road asphaltpavements production and exploitation must be identified. A comparative evaluation of the environmental impact for recycledand traditional road pavements asphalt mixtures, expressed as the amount of equivalent carbon dioxide, per ton of mixt...
Autori: Alina Mihaela Nicuţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26096

AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

AbstractWater-based printing ink has been used widely and perfectly in printing the packaging of food, drug, and wine products etc.However, due to the need of altering different colors of ink, most water-based printing ink wastewater was generated from theequipment cleaning process. Coagulation combined with Fenton process has been used for this kind of wastewater treatment inthis study, results showed that coagulation using polyaluminium chloride (PACl) as coagulant and ferrous sulfate (FeSO4) ...
Autori: Xiangjuan Ma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26214

AbstractWater system integration can minimize both fresh water consumption and wastewater discharge from the paper mills. In thepresent study, Pinch Technology was used to analyze and optimize the water network of an integrated paper mill. A system wasdeveloped and a limiting constraint (COD concentration) was identified based on investigations for water quality, and thenminimum fresh water and wastewater targets were determined without considering water losses. The analysis was extended byestim...
Autori: Sudheer Kumar Shukla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26240

AbstractMunicipal solid waste management is a matter experienced by the entire world, mostly encountered in urban areas as a result ofpopulation growth and increased income per capita. This issue always posed threats to environmental quality and human health,and continues to be one of the major environmental problems people continues to face. In the last few decades, the systemsanalysis techniques have been applied to manage the municipal solid waste (MSW) streams through a range of integrativem...
Autori: Cristina Ghinea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26481

AbstractEnd-of-life tires are waste materials that pollute landscapes when they are disposed of in tire dumps. However, its life cycle is notfinished when they are scrapped. The rubber of end-of-life tires could be used for new purposes as construction material in roadrehabilitation. A gap-graded mix characterization was carried out in this work by means of laboratory and field performancetests. The mixture has a high content of crumb rubber (CR) by weight of bitumen. Crumb Rubber was added to t...
Autori: Victor F. Vázquez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26577

Abstract The aim of this paper is the adaptation of an Ecodesign methodology for product publishing SMEs that have implemented Lean Management. To obtain verification of this methodology, an eco-redesign case study of a product has been carried out from a furniture publishing SME which applies lean management to its entire production chain. Some proposed improvements resulting from this case study were: Design for dismantling, Multifunction, Dematerialisation, Increasing the material of rene...
Autori: Sara González-García
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26592

`Abstract End of life tires require sound accounting of environmental performances to design sustainable procedures for material recovery. Their use in rubber modified asphalt provides could lead to the improvement of technical and environmental performances of asphalt roads, but the effectiveness of simplified procedures is to be proved. During LIFE+ project ROADTIRE, a rubber modified asphalt road prototype, with the upper surface layer containing 10% crumb rubber in the bituminous binder,...
Autori: Irene Bartolozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26741

Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

Abstract As the percentage of segregated waste, taken as individual indicator, is insufficient to measure the virtuosity of a Municipality waste management, a multicriteria indicator has been developed to broaden the horizon of the analysis of waste management performance. The aim of this study is to experiment a new and easy–to-use methodology for the evaluation of Municipalities virtuosity in waste management, built from Public Administrators to verify the responsiveness between thei...
Autori: Alessandra Bonoli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26786

Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

Abstract The recycling of plastic waste is important both in the conservation of resources and the environmental protection. A plastic waste (PE/PP/PS/PVC) was pyrolyzed over a series of post-use FCC catalysts using a fluidizing reaction system similar to the FCC process operating isothermally at ambient pressure. Experiments carried out with these catalysts gave good yields of valuable hydrocarbons with differing selectivity in the final products dependent on reaction conditions. A model ba...
Autori: Ta-Tung Wei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26836

Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

The release of nitrogen compounds into the environment is a major concern worldwide. Different studies howed that recycled materials have a high removal capacity for pollutants. Bentonite and its major clay minerals, smectites clays are common bleaching agents used for oil refinery bleaching and known as bleaching earth (BE). In this study regeneration of spent bleaching earth (SBE) acquired from the vegetable oil industry was surveyed via different methods and the regenerated spent bleaching...
Autori: Mohammad Malakootian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27000

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

In this paper both kinetic and thermodynamic parameters of thermochemical transformation of waste tires are evaluated by using thermogravimetric analysis (TGA). For rubber thermochemical decomposition, individually and in the presence of other tires components, some kinetic and thermodynamic parameters such as energy of activation (Ea), frequency factor (A), reaction enthalpy (ΔH), entropy (ΔS) and free energy (ΔG) have been calculated by using the integration method. The e...
Autori: Sana Kordoghli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27060

We computed the Product Environmental Footprint (PEF) to identify the environmental performance of recycled wool by means of data belonging to a real case study in Italy. First, we analyzed inventory data quality by computing the data quality rating (DQR) index, according to the criteria provided by the PEF protocol. Quality of specific and generic data (selected from the Ecoinvent database) was evaluated as excellent and good, respectively. We then quantified the impacts related to each rele...
Autori: Silvia Bamonti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27121

Waste frying oil (WFO) is a complex and heterogeneous waste collected mainly from restaurants and, to a lesser extent, from food processors and households. In the last decades, interest for this waste has deeply grown and a strong competition in grabbing this raw material has begun. About 90% of WFOs collected in Europe is recycled for biodiesel production, being the high free fatty acids (FFAs) concentration in WFOs one of the main drawback limiting the yield of the conversion process. In th...
Autori: Cinzia Pezzella
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27130

The aim of the present work is to investigate the effect of marble waste fillers incorporation on the mechanical properties of Recycled Aggregate Concrete (RAC). The RAC studied mixes were 0, 5, 8 and 10% (by weight of cement) of marble fillers respectively. Direct tests of compressive and flexural strength and non-destructive testing (NDT) (rebound hammer, ultrasonic) were performed. The optimal content of 5% marble fillers showed an improvement for both used test methods (compression, flexion ...
Autori: Larbi Belagraa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27240

Sustainability and integration are becoming keywords in many European Union policies, including ones that are directly or indirectly related to mineral resources and waste management. Moreover, life cycle thinking (LCT) is core to many of these policies. The European Commission has issued the Communications “A resource efficient Europe” and “Roadmap to a Resource Efficient Europe”, the stated goal of which is to reconsider the whole life cycle of resource use so as to mak...
Autori: Gian Andrea Blengini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27267

End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

Common issues of the gasification systems relate to filtering apparatus. Dry filtering processes are simple and reliable. However, the filtering material defines the maximum and minimum temperature at which the filter can operate properly. In addition, dry filtration is not effective on light tar compounds (i.e. benzene and toluene) or ammonia compounds. On the other hand, despite being very efficient, wet filters drop the gas temperature below the line of condensation of tar, ammonia and ste...
Autori: Giulio Allesina
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27412

Improving the awareness of the responsibility of our actions is the basis of achieving the ambitious aim of waste management and prevention established by the European Waste Framework Directive 2008/98/CE and the most recent Circular Economy Package. Circular Economy is connected both to improve manufacturing technologies and also educate people towards responsible consumption and waste reduction. Due to its educational and institutional role, universities provide a context to rethink not on...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27414

This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

Timber harvesting and log extraction with conventional ground-based skidding systems in steep, mountainous terrain often results in severe damage to residual stands and forest sites. In this study, the impact of rubber-tired skidders on standing trees along sides of the trails was investigated 5 to 20 years post-harvest in terms of frequency and development of decay at the points of wounding. The study was located in the Hyrcanian mountainous forests of Iran. All standing beech trees (healthy or...
Autori: Davoud Kartoolinejad
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27457

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

The Silicon wafer plays an important role in modern electronic products. During the production of Silicon wafer, a large amount of scrap Silicon wafer is generated. The necessity for it to be recycled and recovered is of vast importance since the metal Silicon (Si) is the major by product. Besides Silicon, the wafers also contain a small quantity of Copper (Cu) and Aluminum (Al), that are considered as minor elements during the recovery process of the Silicon wafer production. Therefore, in o...
Autori: Ching-Hwa Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27660

The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

The paper describes a flexible and low cost method regarding the progress of improvement, in terms of foot diseases, in case of wearing orthopedic shoes containing progressive correction orthotic insoles. The research in the field aims at two purposes. The first one is to find an effective method for orthopedic shoe insoles manufacturing, with the role of progressively correcting plantar diseases by using cheap solutions based on the recycled materials. The research focused on an adaptive insole...
Autori: Barbu Braun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27757

In the light of water shortages, frequently affecting many regions worldwide, domestic rainwater harvesting, and greywater reuse systems represent an alternative source of water. This study fits this framework providing a hydraulic/hydrological model developed by means of the EPA’s Storm Water Management Model. The model has been applied to a case study, which consists of an apartment building located in the city of Bologna and equipped with a hybrid rainwater-greywater recycling system. C...
Autori: Sara Simona Cipolla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27789

Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

The aim of this paper was to investigate the possibility of incorporation non-metal fraction (NMF) in concrete products as a substitute for aggregate on industrial scale, while other studies are mostly based on NMF incorporation in concrete only on laboratory scale. Mineral filler was supplemented with 5, 10, 15 and 20 wt.% NMF from waste printed circuit boards (WPCBs) and its influence on concrete quality was assessed based on compressive and tensile strength conducted on laboratory and indust...
Autori: Vitomir Premur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27857

In this paper, an improved engineering model and analysis techniques are presented of the fly ash particles coagulation with droplets in Venturi tubes of industrial scale, based on spatial variation of the collection efficiency of particles on individual droplets, accounting for spray water flow polydispersity and particle size distribution, which allows to define optimal droplets size and spray water flow rate at different modes of thermal power units operation. The model is validated with the ...
Autori: Igor Volchyn
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27836

In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

The paper presents the experimental results obtained on cement concrete with different types of waste and the analysis of their effects on density, compressive strength, flexural strength and splitting tensile strength. The tests results were compared with a control mix without aggregate substitution. The fly ash was used as replacement of cement and polystyrene granules, chopped plastic bottle (PET) and wood waste were used as substitution of 0-4 mm aggregate sort in different dosages from 0% t...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27978

In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

This study aims to define a municipal Solid Waste Management (SWM) strategy using Multi-objective Optimization Problem (MOP) and ELECTRE method. Four waste treatment technologies were considered: recycling, composting, incineration and landfilling. Firstly, a Multi-objective Linear Programing (MOLP) model was developed. The solutions obtained from this model were ranked using the ELECTRE method. It was considered as case study a hypothetical city of 1,000,000 of inhabitants, presenting the a...
Autori: Rafaella de Souza Henriques
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27998

Slags are the main by-products from steelmaking cycle, which are currently recycled inside the steel industry as well as in other sectors with significant environmental and economic benefits. As in Italy slags application is not yet allowed in agriculture, the paper aims at evaluating the technical and economic feasibility of a slag treatment plant, to obtain a product to be sold in the fertilizer market as soil amendment. A preliminary assessment of the fate of some trace metals (Cr, V, Sb a...
Autori: Teresa Annunziata Branca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28012

The combustion behavior of several polymers was studied with a cone calorimeter, while the samples were based on a recycled acrylonitrile-butadiene styrene (ABS) and as additives were considered: organic montmorillonite (OMT) and a mixture of two fire retardants (FR). The samples structure and thermal properties are characterized by means of Scanning electron microscopy (SEM), X-ray Powder Diffraction(XRD) and Energy-dispersive X-ray spectroscopy (EDX) and cone calorimeter. The main objective o...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28098

The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

The production of food wastes is a serious issue in developed and developing countries. The biogas production technology is one of the most sustainable methods for treating food wastes. Currently, there is a great need to implement suitable methods to enhance biodegradation and methane production. This study investigated the effect of manure addition and leachate lime-pretreatment on the biogas and methane production from spoilable municipal solid wastes using a hybrid anaerobic-aerobic bioreact...
Autori: Fatemeh Aliasgari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28123

Apart of new equipment’s development such as absorption columns with higher efficiency, for chemical industry, there is a strong need for greenhouse gases reduction in order to assure the environmental protection and, consequently, many studies regarding the purification methods of exhausted gases have been performed. There are several types of reactors used for gases purification, such as: bubbling jet reactor, combined packed and spray tower absorber, cable wet scrubber and packed column...
Autori: Elisabeta Droniuc Hultuana
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28160

Interest in water recycling has provided opportunities to evaluate the potential impact of pharmaceuticals and personal care products (PPCPs) on plants where recycled wastewater is used for watering and irrigation. Most researches have focused on the impact of pharmaceuticals on seed germination and plant physiology or the uptake of pharmaceuticals into plants. We sought to find out whether nutrient and metal uptake into wheat plants were affected by the presence of PPCPs (acetaminophen, caffein...
Autori: Etem Osma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28193

Nine samples of recycled acrylonitrile butadiene styrene (ABS) with organic montmorillonite and fire retardants adding were combined to prepare ABS copolymer nanocomposites. A very good dispersion of clay and fire retardant was noticed in the recycled ABS (reABS) matrix. The effect of montmorillonite and fire retardants on the mechanical and thermal properties of the reABS nanocomposites was further investigated. Experimental results showed that the addition of organic montmorillonite increased ...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28203

Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

This study analysed the recycling of debris derived from the partial and selective demolition of concrete structures of Sant’Elia Stadium in Cagliari (Sardinia, Italy). This recycling was carried out to obtain coarse recycled aggregates for the production of recycled concrete. The experimental investigations demonstrated the possibility of using these recycled concrete aggregates in structural concrete and in precast concrete element, with unchanged production processes and suitable mechan...
Autori: Luisa Pani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28307

Saline-sodic soil reclamation can be enhanced with a sustainable and environmental approach by using organic waste materials. Moreover, wastewater can be used in leaching processes to protect freshwater resources in regions with water shortages. The aim of this study was to reclaim saline-sodic soil by using recycled wastewater and stabilized sewage sludge together with gypsum. The experiment was designed with three replicates using four different sewage sludge doses (0, 4, 8 and 12 kg m-2), an...
Autori: Almujtaba Hassbalrassol Muhammed Abdallh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28330