AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

Include urmatoarele articole:� Environmental Engineering and Management Journal, Vol. 8 Nr. 2� Bioengineering aspects of tissues culture bioreactors for medicine and environmental applications� Removal of bis (1-chloro-2-propyl) ether from wastewater using sonodegradation and biodegradation� A novel plasma reactor for toluene decomposition in contaminated air flow� Study of the copper (II) removal from aqueous solutions by chelating resin Purolite S930 � Analysis of some metal levels...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25371

AbstractThis paper analyses a new technology for minimizing the use of metalworking fluids (MWF) during the machining process. Despite the fact that near dry machining (NDM) produces almost similar cutting performance to conventional flood supply machining while using much less MWF, for being fully utilized in industry is necessary to research ecological impact of these machining techniques. To take full advantage of minimal quantity lubrication (MQL) technique and expand its applicability, an u...
Autori: Domnita Florina Fratila
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25382

Abstract Starting from the disadvantages of the polystyrene system – the most important being that they are not biodegradable and their life cycle is relatively small, up to fifteen years – there were conceived several structures for outside walls made of perforated bricks vertically disposed and filled with granular materials. In this manner the thermal resistance is improved knowing that in gaps bigger than twenty millimeters there appear convective streams which substantially decrease ...
Autori: Răzvan Giuşcă, Vladimir Corobceanu, Raluca Giusca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25551

? MUNICIPAL SOLID WASTE LANDFILLING AND TREATMENT OF RESULTING LIQUID EFFLUENTS ? ROMANIA: ENTREPRENEURIAL VALUES AND SUSTAINABILITY ? THE COMPRESSIVE STRENGTH OF WOODEN BRIQUETTES USED AS RENEWABLE FUEL ? ECO-FRIENDLY EXTRACTION AND SEPARATION METHODS OF CAPSAICINES ? ADDRESSING ISSUES OF GEOENVIRONMENTAL RISKS IN DOBRUJA, ROMANIA/BULGARIA ? ADSORPTION OF 2,4-DINITROPHENOL AND 2,6-DINITROPHENOL ONTO ORGANOCLAYS AND INORGANIC-ORGANIC PILLARED CLAYS ? APPLICATION O...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25659

Abnstract:In recent years, solar receivers have been employed in several applications where high temperature fluids are involved, such aspower plants and solar thermal reactor. The possible presence of high temperature gradients could determine reduced receiverefficiency and a short life of the material. Thermal and fluid dynamic analysis of the receiver allows to highlight possible presenceof temperature gradients and to evaluate their values and the more critical zone of the material. Compress...
Autori: Alina Adriana Minea, Oronzio Manca, Salvatore Tamburrino, Sergio Nardini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25779

Abstract Oil contamination has been one of the most common environmental pollution due to its threat to both human health andecosystems. It is difficult for the application of conventional chemical analysis to detect oil contamination in-situ, estimatebioavailability and rapidly assess the environmental risk. In this study, two bioreporters were employed for the rapid and directdetection of oil content and genotoxicity in a cutting oil contaminated site in China. Acinetobacter baylyi ADPWH_...
Autori: Bo Jiang, Chuan Li, Dayi Zhang, Guanghe Li, Wei E. Huang, Yizhi Song
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25944

AbstractThe hydrodynamics of two equipments from a surface water treatment pilot plant has been investigated through residence timedistribution (RTD) experiments using brine solution as tracer. Computational Fluid Dynamics (CFD) procedure, which isincreasingly utilized to study a wide variety of complex environmental fluid mechanics processes, was used to predict the flowpatterns and other properties of flowing fluids (e.g. velocity, concentration of species etc.). In this work, ANSYS Fluent 14....
Autori: Adina Pacala, Alain Liné, Alexandru-Dan Filep, Cosmina-Mariana Militaru, Teodor Todinca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26030

AbstractSupply of heat energy is of the high importance in the northern countries of the Europe. EU energy policy and high prices of theheat energy resources takes a challenge to find any alternative resources for generation of heat energy. Therefore in this paper the integration of renewable energy source - solar energy into the existent heat energy supply system is analyzed as the alternative or additional source of heat energy. The case study of the Girionys boiler-house (at Kaunas district, ...
Autori: Jolanta Dvarionienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26201

AbstractOceans have been proved to be an important resource due to their abundant reserves in oil and gas. However, because of the extent of oil exploration and development in recent years, the marine ecological environment has been increasingly affected. At present, the control and treatment of environmental pollution from offshore drilling both at home and abroad have focused on end-treatment after problems have already emerged. Nevertheless, preventative measures and appropriate control links...
Autori: Guancheng Jiang, Guangquan Liu, Hao Deng, Rongsha Wang, Shuixiang Xie, Yu Xu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26279

AbstractResearches aim to develop new knowledge in the metal cutting field, using a relatively new technique with a low number ofapplications nationwide, namely the flexible explosive charge with cumulative effect for fast and precise cutting of metals. Theprocedure of cutting with explosives is a process that involves using and handling materials in their solid phase.This procedure isespecially applied in cases where materials are mostly metals and it uses a directed and controlled cumulative e...
Autori: Ilie Ciprian Jitea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26410

AbstractThe aim of the current study is to analyse the effects of reusing the abrasive material, in different rates, on the quality of surfacesprocessed by abrasive water jet cutting (AWJ) and to correlate it with the environmental impact. In view of this, two aluminiumalloys are processed, Al 2024 T3 and Al 6065 T651, respectively, with large applicability in the aeronautic and machine buildingindustries. It was found that for reusing rates of the abrasive material higher than 60%, a better qua...
Autori: Carol Schnakovszky
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26438

AbstractThe primary objectives of this study were to identify the ecotypes of the ‘longicaulis’ giant reed (Arundo donax L.) that arewinter-frost and cold tolerant in temperate climates on marginal lands and to perform biotechnological research on theseecotypes. We searched for large ‘longicaulis’ giant reed ecotypes, which wintered successfully in spite of the 2012/2013 winterfrosts and sprouted from stem nodes in the spring of 2013 in three locations of the Balaton basin. Starting in vitro cul...
Autori: Gabriella Antal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26527

Abstract Supercritical fluid and ultrasound assisted extractions were applied as a first step in a complex processing of spruce bark in order to recover polyphenols compounds. The aim of the study was to compare the efficiency of these "green" processes with a conventional extraction technique (ethanolic extraction). Supercritical fluid extraction was carried out in two steps: (i) static extraction for 15 min at 1000 psi with pure CO2 and (ii) dynamic extraction for 45 min at 35, 4...
Autori: Adina Iulia Talmaciu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26680

Abstract Based on the study on the reformation of Dawsonite-bearing sandstones with CO2 fluids at different temperature (100oC 200oC and 300oC) and different CO2/H2O/sandstone systems, it is suggested that as the temperature increases, the corrosion intensity of dawsonite-bearing sandstones is gradually increased, but the stability of the sandstone is reduced. The SEM study shows that there are radiated aggregate sediments of boehmite in all samples. At 200oC, with the dissolving of dawsonit...
Autori: Xi-Yu Qu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26814

Abstract The Waste Management activity (WM) is an urban action becoming more and more important in the municipal economy. In many cities, this activity is linked to significant revenues from the selective waste collection services. Because the current economic situation requires an increasing efficiency and profitability in order to succeed in cutting the operational costs, and as an important part of revenue comes from this selective waste collection activity, the effectiveness must be impr...
Autori: Gabriel Murariu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26872

Abstract The current industrial trend is toward the development of sustainable technologies, and environmentally-friendly chemicals that might be used to enhance the drilling activities. This is due to the fact that petroleum industry is regarded as one of the hazardous and risky industries. Unfortunately, the majority of the toxic materials that are used in the formulation of drilling mud are employed to improve the quality and functions of drilling fluid. Oil based muds (OBMs) from hydroca...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26907

Waste recycling in steel industry by turning grain-size and powdery waste into pellets is a must now more than ever for economical motivation, in order to save raw materials and also for ecological reasons, as it leads to a cut down in the quantity of dumped waste. Industrial practice offers processors various technologies of waste recycling (agglomeration, briquetting, pelleting, mechanical mixture). The optimal variant should be chosen according to waste type, its content of useful elements...
Autori: Ana Virgina Socalici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26968

This paper highlights the benefits of using Geographical Information Systems (GIS) for a Sustainable Forest Management (SFM). A basic forest unit was studied for which a GIS project was performed. For this purpose cadastral base plans, scale 1:5,000 were scanned and vectorized and, in addition, 2704 locations were determined on the fields using the GPS equipment, to make sure that the areas of the compartments and subcompartments are correct. Dendrometric characteristics of the trees (i.e. d...
Autori: Cornel Cristian Tereşneu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26970

Rotifers are known as cosmopolitan organisms, found in high density in most waters, often representing the dominant group in terms of species diversity and abundance in the zooplankton community. Since the functionality of an ecosystem is closely related to the diversity of communities, analysis of rotifers assemblage may be a useful tool in understanding the mechanisms of the spatial and temporal changes on this level. Data were collected from 2008 until 2010, in distinct areas of Danube, Sf...
Autori: Larisa Florescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27247

This paper presents some experimental results regarding mechanical behaviour at shear cutting Miscanthus x giganteus stem with an oblique blade of different edge angles. Experimental determinations were performed using samples of about 30 mm in length and a medium diameter of about 6.3 mm to 8.9 mm. The biomass was cut with three bevel cutting blades of 30 degrees, with a tool angle of 10, 30 and 50 degrees, fitted on an equipment used for mechanical experiments type Hounsfield, with a working s...
Autori: Georgiana Moiceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27317

Drilling waste management for oil and gas industry involves collection, transportation, processing, recycling, disposal, and monitoring of waste materials in order to reduce their effects on health and environment. In the Exploration and Production industry, environmental concerns have made effective management of drilling waste at well sites a great priority. Effective waste management is thus a key element in a successful drilling project. The industry therefore relies on effective expertise a...
Autori: M. Enamul Hossain
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27375

According to EU Strategy for the Baltic Sea Region, Lithuania obligates to ensure sustainable growth, gain and maintain good condition of marine environment until 2020. In accordance with the sustainability approach, every potential cost and energy cutting as well as social sustainability measure for wastewater treatment should be explored. Nonetheless, Lithuania wastewater treatment plants (WWTP) in the sustainability context have never been evaluated before. A comprehensive set of 30 sustainab...
Autori: László Gyenge
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27578

According to EU Strategy for the Baltic Sea Region, Lithuania has to ensure sustainable growth, gain and maintain good condition of marine environment until 2020. In accordance with the sustainability approach, every potential cost and energy cutting as well as social sustainability measure for wastewater treatment should be explored. Nonetheless, Lithuania wastewater treatment plants (WWTP) in the sustainability context have never been evaluated before. A comprehensive set of 30 sustainable dev...
Autori: Jolanta Dvarionienė
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27583

This paper presents an assessment of the toxic compounds released from metalworking fluids (MWFs) used in aluminum solid waste processing and from aluminum slag landfills, and their impact on environmental quality and human health. The mean concentrations of dust, oil mist, aldehydes, volatile organic compounds (VOCs) released from metalworking fluids were determined in machine shops. The exposure in machine shops was quantitatively dominated by VOCs, whose concentrations varied in the range...
Autori: http://www.ecozone.ro/reviste.php?RID=27677

The Water Safety Plan (WSP) model provides a completely new, cross-cutting and multidisciplinary approach for the risk assessment of drinking water pollution. The concept of “control” of the drinking water supply system (DWSS) is replaced by the concept of “under control”, in order to protect human health. The key factor of the WSP approach is the identification and mitigation or, if possible, the elimination of all factors that may cause a chemical, physical, microbial a...
Autori: Maria Cristina Collivignarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27790

The objective of this paper is to investigate eco-efficiency in a durable goods manufacturing system. It is intended to apply a method used in a company producing heating devices within the boiler sector. A hybrid methodology is used to assess the eco-efficiency of manufacturing processes, based on combining Material Flow Analysis, Life Cycle Assessment, and Material Flow Cost Accounting. This provides an effective approach to evaluate environmental and economic performance in the context of ...
Autori: Aldona Kluczek
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27918

Watercourses that transit rural / urban areas are susceptible to the phenomenon of aquatic pollution due to various types of polluting species. The important issues of river pollution and of polluting species dispersion, require an approach with predictive tools (models for transport of polluting species) which can evaluate the performance of depollution measures/actions to reduce pollution and to take optimal management decisions. Thus, from January 2017 to May 2017, a monitoring investigati...
Autori: Lorand Toth
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27967

In Spain, most substrates used in the production of plants in containers, are composed of peat in combination with other components such as pine bark, perlite or vermiculite. In order to find alternatives to the use of peat, shredded switchgrass (Panicum virgatum L.) biomass was evaluated as a component of the substrates. Five substrates were prepared with the following proportions, by volume, of commercial substrates:switchgrass: 100/0, 75/25, 50/50, 25/75 and 0/100. Pots were filled with the ...
Autori: Jose Alberto Oliveira Prendes
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28134

Salinity of irrigation water is one of the main environmental constraints limiting the geographical distribution of several species. In order to understand and to cope with critical environmental constraint, a pot experiment was undertaken to investigate the potential effect of irrigation with various natural saline waters gathered from arid and semiarid regions; on rooting of stem cuttings, growth and on the physiological responses of Mascarene grass (Zoysia tenuifolia Willd.). The obtained res...
Autori: Sihem Soufi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28169

Oil-based drilling fluids are widely used in oil and gas exploration and development. Large amounts of oily drilling cuttings are produced in the drilling process, and improper treatment can cause serious secondary pollution. Chemical cleaning is commonly used to treat oily drilling cuttings. However, most degreasing agents are not environmentally friendly and can cause secondary pollution. Thus, the processing requirements of oily cuttings are difficult to meet. In this study, an environmental...
Autori: Zhiyong Li
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28313