Contain all the articles from this issueICEEM/01 -- Environmental Engineering SectionThermodynamic and kinetic study of gas desulphurization by adsorption on zeolites  Ion Untea, Dan Brasoveanu, Madeleine Dancila, Szidonia Bocskor Mixed oxides derived from vanadium substituted layered double hydroxides as catalysts precursors for SO2 oxidationGabriela Carja, Ionel Popa, Gabriela Ciobanu, Nicolae Aelenei The impact of energy production on environment in RomaniaCarmen Zaharia, Mioara Sur...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25168

Contain all the articles from this issueICEEM /02 PLENARY SESSION:"Environmental Engineering and Management in the Context of Sustainable Development"Green technology foresight of high technology: Hype of potentials - The challenges from nanotechnology, Biotechnology and ICTMichael S?¸gaard J?¸rgensenIntrinsic properties of noble metals in catalytic selective reduction of NO by propene in lean burn conditionsAnne Giroir-Fendler, Helleh Saadallah, Adela HaletaICEEM/02 - ENVIRONMENTAL ENGINEERING ...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25178

Contain all the articles from this issueICEEM/02 - ENVIRONMENTAL ENGINEERING SECTION"Treatment Technologies for Gaseous Fluxes"Surface chemistry studies on molybdena–alumina catalystTatiana Yuzhakova, ?kos R?Šdey, Endre Domokos, J??zsef Kov??cs, Monica Caldararu, Cristian Hornoiu, Mariana Carata, G.Postole, Cornel Munteanu, Larisa Strukova, Jozse FazakasHebicidal behaviour of a new N,N'- biquaternary salt of 4,4'- bipyridineServilia Oancea, Marinela Irimia, Gabriela Carja, Anton Airinei, Nicu...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25189

AbstractThis paper discusses the results of study concerning the interaction between the birch veneer and some compounds with biocide potential action are presented. With this end in view the samples of veneer were immersed in solutions with a concentration of 5% of the following products: unmodified straw lignin or modified through hydroxymethylation, furan resin and tannins dissolved in 0.1 N ammonia solution. To make a comparison, the same combined treatments were applied, using ammonia solut...
Autori: Adina-Mirela Capraru, Elena Ungureanu, Valentin I. Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25309

AbstractWood-based epoxy resin was synthesized from resorcinol-liquefied wood. First, wood components were depolymerized and liquefied by reaction with resorcinol. The resorcinol-liquefied wood with plenty of hydroxyl groups could be considered as a precursor for synthesizing wood-based epoxy resin. Namely, the phenolic-OH groups of the liquefied wood reacted with epichlorohydrine under alkali condition. By the glycidyl etherification, epoxy functionality was introduced to the liquefied wood. Th...
Autori: Akira Fujita, Hajime Kishi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25310

Include urmatoarele articole:� Biomass - A source of chemicals and energy for sustainable development � Equilibrium study of Pb(II) and Hg(II) sorption from aqueous solutions by moss peat� Wood-based epoxy resins and the ramie fiber reinforced composites� Studies on the interaction between birch veneer and compounds with biocide potential action� Effect of methanogenic inhibitors, inocula type, and temperature on biohydrogen production from food components� Energy from biomass in pul...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25313

AbstractTwo non-functionalized hypercrosslinked polymeric resins type Macronet (MN 202 and MN 250) were employed to remove nhexane vapors from gas phase. A comparison of the equilibrium behavior of these hypercrosslinked resins and a bituminous granular activated carbon was made. The initial n-hexane concentration in the air stream ranged from 2100 to 4500 ppm and the adsorption temperatures were 30oC, 40oC and 50oC. The results showed that the MN 250 presents the higher adsorption capacities of...
Autori: Adela Marilena Buburuzan Haleta, Cezar Catrinescu, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25341

Include urmatoarele articole:� Environmental Engineering and Management Journal, Vol. 8 Nr. 2� Bioengineering aspects of tissues culture bioreactors for medicine and environmental applications� Removal of bis (1-chloro-2-propyl) ether from wastewater using sonodegradation and biodegradation� A novel plasma reactor for toluene decomposition in contaminated air flow� Study of the copper (II) removal from aqueous solutions by chelating resin Purolite S930 � Analysis of some metal levels...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25371

� Physiological changes in seedling germination and growth plant under chemical stress conditions� Studies on sorption and transport processes of cadmium in soils� Assessment of the anthropogenic impact on water systems by fluorescence spectroscopy� Research on the effects of soil improvement by fertilization on the quality of winter wheat� Halotherapy: From ethnoscience to scientific explanations� Study regarding the sorption of erythrosine from aqueous solution onto soil� Hydroxy...
Autori:
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25375

AbstractThe adsorption characteristics of n-hexane vapors from gaseous stream onto two types of hypercrosslinked polymeric resins (MN 202 and MN 250), and a bituminous granular activated carbon (AC 20) was investigated. The n-hexane influent concentration ranged from 2100 to 4500 ppm and the adsorption processes were performed at 30, 40 and 50 ?C. Thermodynamic potentials ?H, ?S, and ?G and isosteric heats of adsorption were calculated from experiment performed at different temperatures (30-50?C...
Autori: Adela Marilena Buburuzan, Cezar Catrinescu, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25393

Abstract This work examines the influence of experimental conditions on the copper (II) ions removal from aqueous solutions using chelating ion exchange resin Purolite S930. The influence of solution pH, initial metal concentration, contact time, temperature, ionic form of the resin and resin dose was studied in batch experiments. The percent of Cu (II) removal has a maximum at pH 5.0 (buffered solutions), and increases with the increasing of resin dose, of the contact time and of temperature...
Autori: Petru Bulai, Catalin Balan, Doina Bilba, Matei Macoveanu
ISSN: 1582 - 9596
http://www.ecozone.ro/reviste.php?RID=25401

Abstract The waste recycling done in order to obtain composite products with performant properties and also, with long life cycle is the main purpose for the sustainable development. The present paper describes the way in which, different kind of solid wastes are immobilised in an organic resin as a binder matrix. Composites with different proportion of waste as, rubber/plastic, glass and silica sand have been obtained. The physical-mechanical properties and chemical stability of such organic...
Autori: Ioan Ropota, Emilia Zamfirache, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25450

Abstract Macro-Defect-Free (MDF) cements are polymer-cement composites characterized by high value of flexural strength. Due to their thermal and electrical insulating properties, MDF cements could replace other insulators obtained by environmental non-friendlier technologies or being themselves toxic and non-biodegradable. MDF cements obtained by the use of an ecologic polymer (poly(vinyl alcohol)) shows high mechanical resistance in the initial state but also it’s dramatic decrease after ...
Autori: , Georgeta Moise, Hulusi Ozkul, Ozgur Ekincioglu, Catalin Croitoru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25493

Abstract The paper briefly presents the principle, methodology basics and the research opportunities offered by a modified L-joint test for a complex in-field evaluation of wood behaviour in outdoor above ground exposure, corresponding to the biological use class 3. A comprehensive and detailed examination of the tested samples, looking not only to the biological degradation of wood but also to wood cracking and coating performance (cracking, flaking, exfoliation, adherence), was performed an...
Autori: Maria Cristina Timar, Emanuela Beldean, Mihaela Porojan, Lidia Gurau
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25494

Abstract In the paper is analyzed the possibility of using some industrial wastes for obtaining new building materials. From the industry or from the power station a lot of by-products or wastes have resulted and their storage is a big problem for the environment. In the building material industry a part of these wastes can be used in different ways: for replacing the cement, as addition in concrete, as component of cements, in the mixture of polymer concrete, etc. In the present investigati...
Autori: Marinela Bărbuţă, Nicolae Taranu, Maria Harja
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25525

Abstract The presence of heavy metals in the environment is a major concern due to their non-biodegradability, bioaccumulation tendency, persistence in nature and toxicity to many life forms. Different treatment techniques for wastewater laden with copper have been developed in recent years to decrease the amount of wastewater produced and to improve the quality of the treated effluent. All techniques have their advantages and limitations in application. One of the most used techniques to rem...
Autori: Petru Bulai, Catalin Balan, Camelia Scripcariu, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25531

Abstract Sorption is one of the several methods that have been successfully utilized for dyes removal. A large number of materials have been used as suitable sorbents for decolourization of industrial effluents: activated carbon (the most common but expensive adsorbent), polymeric resins, various low-cost adsorbents (agricultural and industrial by-products, peat, chitin, silica, bentonite, other clays, fly ash). Our paper is a review about our researches regarding different types of industri...
Autori: Daniela Suteu, Carmen Zaharia, Augustin Muresan, Rodica Muresan, Alina Popescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25532

Abstract The practical capacity of an ion exchange or chelating resin depends on various process variables, such as initial solution pH, initial metal ion concentration, metal/resin ratio, contact time and temperature. This work presents the optimization of process variables to maximize the copper loading capacity of chelating resin Purolite S930. To study the combined effect of the initial solution pH, initial Cu (II) concentration and resin dosage were used a 23 orthogonal central composi...
Autori: Petru Bulai, Catalin Balan, Corneliu Cojocaru, Matei Macoveanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25563

Abstract The removal efficiency of Pb(II) from aqueous solutions by sorption on a bifunctional acrylic ion exchange resin with groups of hydroxamic acid and amidoxime is presented. It was found that Pb(II) sorption potential varies as function of solution pH, initial metal concentration, contact time and temperature. From aqueous solutions with Pb(II) initial concentration of 82.96 ?ŽÂ?g/mL the sorption percentage is 98.64%. The Langmuir and Freundlich isotherms were used to model the Pb(II) ...
Autori: Anca Ceica, Carmen Paduraru, Igor Creţescu, Lavinia Tofan, Violeta Neagu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25586

? SUSTAINABLE CONCRETE HARDENING PROCESSES IN NORMAL CLIMATIC AND THERMAL TREATMENT CONDITIONS ? THE ENVIRONMENTAL DIMENSION ? AN INTERDISCIPLINARY RESEARCH AREA ? MENU PLANNING STRATEGY BASED ON ECOLOGICAL FOOTPRINT ? EVALUATING ENVIRONMENTAL IMPACT OF NIGERIAN COMPOSTED WASTES USING LABORATORY EXTRACTION TEST ? IN SITU RADIOFREQUENCY FIELD LEVEL ASSESSMENT IN TWO URBAN AREAS IN ROMANIA: OPEN QUESTIONS TO ELECTROMAGNETIC POLLUTION ? INNOVATIVE SOLUTION FOR WARNING ON HI...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25657

? ADSORPTION OF DYE FROM AQUEOUS SOLUTION USING SILVER WOOD SAWDUST CARBON ? TIME SERIES ANALYSIS OF THE HEAVY METALS LOADED WASTEWATERS RESULTED FROM CHROMIUM ELECTROPLATING PROCESS ? WATER QUALITY CHARACTERIZATION OF THE PRUT RIVER ? ETHICAL AND SUSTAINABLE EDUCATION OF ENVIRONMENTAL ENGINEERS - BETWEEN REALITY AND HOPE ? INTERACTIONS AMONG CLIMATE, VEGETATION AND SOILS IN RADUCANENI ? IASI AREA ? DISTRIBUTION OF MIXING INTENSITY OF OXYGEN-VECTOR DISPERSIONS IN AERATED...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25669

Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

Abstract:In this study, removal of nitrate from aqueous solutions was investigated using an anion exchange resin, Purolite A-520E. Theinfluence of several experimental parameters, such as initial solution pH, resin dosage, phase contact time, initial concentration ofnitrate ions from aqueous solution, and temperature, has been examined in batch experiments. The results of this investigationreveal that the ion exchange process is favored at the initial solution pH (around) 6.8. The resin studied ...
Autori: Anca Ceica, Igor Creţescu, Ion Balasanian, Laura Bulgariu, Liliana Lazăr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25788

Abstract:This investigation focused on the adsorption of Pb (II) onto Lewatit FO 36 resin from aqueous solutions. The effects of initialmetal concentration, contact time, pH of solution were factors that affected the adsorption of Pb (II). Adsorption kinetic was betterexplained by the pseudo second order type 1 kinetic model that was confirmed by the values (R2>0.986). The Langmuir,Freundlich, Temkin and BET adsorption models were used for the equilibrium studies and Freundlich isotherm bette...
Autori: Alireza Asgari, Azra Setodeh, Mehdi Ahmadi, Mohamad Sedigh Mortazavi, Pari Teymouri
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25791

Abstract:The adsorption performance of a novel support for metal ions sorption and their removal from aqueous solutions was examined.The support is a new solvent-impregnated resin (SIR) which can be considered as an alternative adsorbent material capable ofselective sorption. The adsorbent was prepared by impregnating di-(2-ethylhexyl)-phosphoric acid (D2EHPA) onto AmberliteXAD7 resin beads, by dry impregnation method. The interaction between XAD7 resin and D2EHPA was evaluated by FTIRspectrosco...
Autori: Adina Negrea, Adriana Popa, Cornelia Muntean, Corneliu Davidescu, Lavinia Lupa, Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25793

Equilibrium and kinetics of nitrate removal from aqueous solutions of pH = 6.8 were investigated using the strong base anion exchange resin (Purolite A-520E) in the batch method. The experimental equilibrium data were analyzed by means of the Langmuir, Freundlich and Dubinin-Radushkevich sorption isotherm models. The Langmuir model describes sorption isotherm of nitrates with high correlation coefficients and better than Dubinin-Radushkevich and Freundlich models. The effect of temperature on th...
Autori: Anca Ceica, Igor Creţescu, Ion Balasanian, Laura Bulgariu, Liliana Lazăr
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25851

AbstractIn spite of the fact that concern on water quality protection raised in the last decades heavy metals pollution still represents agreat threat for both human health and environment quality. Ion exchange proved to be an effective technique for industrialwastewaters treatment, as long as it ensures an effective recovery of valuable compounds. The main purpose of this work is toassess the performances of a commercial ion resin sort (a strong basic anionic resin – VIONIT AT 21), to remove ch...
Autori: Alexandra Raluca Miron, Cristina Costache, Cristina Modrogan, Dumitru Giani Apostol, Oanamari Daniela Butucea, Redha Kouachi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26025

AbstractThe performance of two cation exchanger resins, Amberjet UP1400 and Amberlite IR120 in the process of Cs(I) ions removalfrom aqueous solutions was examined. Batch experiments were carried out to determine the influence of several parameters(resin dosage, contact time, temperature and initial concentration of Cs(I) ions) on the removal process. The equilibrium wasreached after 60 min for Amberlite IR120 and after 120 min for Amberjet UP1400, with an overall adsorption performance of~97% f...
Autori: Adina Negrea, Cornelia Muntean, Corneliu Mircea Davidescu, , Mihaela Ciopec, Petru Negrea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26032

The book edited by Haibo Xie and NicholasGathergood focuses on one of the most importantscientific issues of the 21 century which is thereplacing fossil fuel with sustainable alternatives suchas biomass. Fossil fuels are conventional rawmaterials for many industrial sectors includingchemical and energy production. Usage of fossil fuelis limited by their availability, price and carbonfootprint. Biomass is a renewable resource globallyavailable, cheaper and carbon sequestering. Step bystep shiftin...
Autori: Adrian Catalin Puitel
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26101

Abstract This paper develops a procedure whereby breakthrough curves obtained experimentally for ion exchange process in fixed bed ion mixed exchangers during water demineralization, can be used to characterize quantitatively and optimize the ion exchange process. In this regard, based on breakthrough curves there were developed statistical models that correlate three important factors which influence the process (superficial fluid velocity through the layer, changing layer height,...
Autori: Iuliana Rogoveanu Radosavlevici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26147

AbstractThe extent of the problem of the excessive fluoride in drinking water remains an important health issue. In the present work,strong-base anion resins were investigated to assess their sorptive removal capacity of fluoride from water. It was found that theremoval of fluoride was high at natural pH (7) and was improved for increasing contact time and adsorbent dosage. Themaximum sorption of the resin was 13.7 mg/g according to the Langmuir model, namely higher than the values reported in t...
Autori: Mohammad Taghi Samadi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26273

AbstractHexavalent chromium can contaminate drinking water resources and should therefore be removed from industrial waste effluents. The use of ion exchange resin was examined in batch tests to remove Cr (VI) from acidic solution by Amberlite IRA 410. Equilibrium data were analyzed and modelled using Freundlich and Langmuir adsorption isotherms and the results showed that the adsorption behaviour of Cr (VI) could be accurately described by means of a Langmuir model. The monolayer adsorption cap...
Autori: Abdeltif Amrane, Aicha Bensmaili, Malika Chabani, Yasmine Ait Ouaissa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26289

AbstractCosmetics, toiletry and household cleaning products are often based on different types of polymeric gels with specific rheologicalbehavior. Dynamic shear oscillation measurements were used for the monitoring of in situ polymerization process, and todetermine the viscoelastic properties of the hydrogels based on polyacrylamide and acetone-formaldehyde resin. Both storagemodulus G’ and loss modulus G” were measured in real time during the gelation process carried out directly between the p...
Autori: Andrei Rosu, Camelia Mihăilescu, Constanţa Ibănescu, Gabriela Halitchi, Maria Lungu, Maricel Danu, Simona Bistriceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26326

AbstractStudies about the adsorption behavior of Cu(II) on D151 resin were conducted. Parameters including the effects of pH,temperature, contact time and initial metal ion concentration were studied by batch methods. Results showed that the adsorptionwas strongly dependent on pH of the medium, and the maximum uptake was obtained at pH 6.90. In the batch system, the D151resin exhibited the highest Cu(II) uptake as 277.8 mg/g at 318K, calculated by the Langmuir model. The adsorption kinetics were...
Autori: Caiping Yao, Chunhua Xiong, Xinyi Chen
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26333

AbstractThe removal of phosphorus by strongly basic anion exchanger was investigated. Removal efficiency increased with contact time,resin mass and initial solute concentration, while temperature showed a reverse effect. Equilibrium data were best fitted ontoLangmuir isotherm model (R2>0.99). Maximum sorption capacity of the resin was 66.22 mg/g, namely significantly higher thevalues reported in the literature. The Freundlich parameter (n = 4.3) and the Langmuir separation factor (RL = 0.067-...
Autori: Abdeltif Amrane, Hamid Reza Ghaffari, Mansur Zarrabi, Mohammad Mahdi Soori, Mohammad Noori Sepehr, Saied Borji
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26343

AbstractThe purpose of the present study is the comparative investigation of the calcium cations removal from aqueous solutions usingtwo strong acid cationic resins recommended during the last years for water softening. The performances of the two resins wereevaluated by the means of the cationic exchange capacity and the retention degree of the calcium cations. The evaluation of thetwo resins behaviour in the ion exchange process was performed by the means of the FTIR spectra recorded on the re...
Autori: Liliana Lazar
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26489

AbstractBisphenol-A (BPA; 2,2-bis(4-hydroxyphenyl)propane) is a monomer used primarily in the production of polycarbonate andepoxy resins that has been reported to have estrogenic activity. The biodegradability of BPA has been previously investigated inseveral studies designed to simulate surface waters and biological wastewater treatment systems. However, there is littleinformation available about the phytoremediation of groundwater contaminated with BPA. Halophytic species are of specialintere...
Autori: Margarita A. Petoussi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26493

Abstract The interest in waterborne paints amelioration increased lately due to the toxicological effect of certain ingredients on human health, the restrictive environmental legislation and the depletion and escalation in price of raw materials. Research efforts in formulating waterborne paints are directed to insure low volatile organic compounds (VOCs) emission while maintaining and even improving their properties. This paper presents a waterborne paint formulation process. The required ...
Autori: Andrei Ionut Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26639

Abstract The capacity of ion exchange resins, MN 500 and C100 H, for the removal of copper ions from aqueous solution has been investigated under different conditions, namely: initial solution pH, initial metal-ion concentration and contact time. The adsorption of Cu(II) on these resins follows the first-order reversible kinetic. The film diffusion of Cu (II) in these ion exchange resins was shown to be the main rate limiting step. The studies showed that these cation exchange resins can be ...
Autori: Cristina Modrogan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26658

Abstract This work presents the optimization of process variables to maximize the percent of Fe (II) removal, R (%), by chelating resin Purolite S930 from 34% CaCl2 solutions. To study the combined effect of the initial solution pH, initial Fe (II) concentration and resin dosage was used a 23 orthogonal central composite design and Response Surface Methodology (RSM) for analysis of experimental data. To optimize the regression equation was used The Gradient method. The study discovered that ...
Autori: Camelia Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26856

Researching and industrializing a new pharmaceutical form results in an impressive amount of waste due to the methods used. Despite numerous reports about the addition of pharmaceutical ingredients to the environment, the effect they have on the environment at the nanogram (ng) level remains largely unknown; thus, it has been proposed to retain toxic compounds using Dowex resins in biomucoadhesive tablets containing miconazole nitrate, an antifungal medication. This study demonstrates the re...
Autori: Magdalena Bîrsan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27091

The aim of this research is to investigate adsorption characteristics of Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) complexes with MGDA (methylglycinediacetic acid) from aqueous solutions by using the multifunctional chelating ion exchanger Diphonix. MGDA, belonging to a group of new generation complexones which readily undergo biodegradation, is patented by BASF and marketed under the brand name Trilon M. Optimum adsorption conditions were determined as a function of phase contact time, ...
Autori: Justyna Jachuła
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27183

Construction industry uses a huge quantity of traditional and modern building materials which generally are produced to satisfy different demands, such as: resistant and safety requirements, friendly with the environment, architectural aspects etc. Researches must solve any requirements related to materials properties and offer a large diversity from which the proper solution must be considered. For improving the mechanical properties of polymer concrete, the use of fibers of different types is ...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27306

This study presents mercury (Hg) assessment in water from tailing dumps collected form NW Romania by using commercial Diffusive Gradients in Thin-films (DGT) devices and Thermal Desorption - Atomic Absorption Spectrometry method (TD-AAS) technique. Additional aim of this study is to present Hg method validation and measurement uncertainty estimation for selected samples. An atomic absorption spectrometer based on thermal desorption for mercury vapor generation and DGT devices specific for Hg (c...
Autori: Marin Senila
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27383

The data presented in this work has been obtained from experimental research aiming towards the usage of natural resources of the National Park of Sila in Calabria, Southern Italy. Such resources are: “Laricio” pine resin, beeswax, mineral inert and charcoal to make natural glues. Furthermore, research has been done to find out if by using small quantities of carbon nanotubes, the strength of adhesion of prepared glues improves. Raw materials were characterized by physico–ch...
Autori: Pierantonio De Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27402

This study focuses on some mechanical properties resulted from the tensile testing of a set of green composites with a Dammar-based matrix and reinforcement material of silk, flax, cotton and hemp fabrics. To be precise, we have ascertained the characteristic curve, the resistance to and the elongation at fraction, as well as the modulus of elasticity for each set of samples from these composites and for a set of bioresin samples. With the help of an Electronic Scanning Microscope we captured im...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27516

In this study major factors affecting the phenolation process of lignosulfonate (LS) waste liquor (recovered from pulp and paper industry) were optimized in order to improve LS substitution for replacing petroleum-based phenols during phenolic resin manufacturing. Four different parameters, namely phenol/lignosulfonate ratio, time, temperature and lignosulfonate waste liquor concentration, were varied in an experimental program having as response function the reaction yield. Response Surface Met...
Autori: Andrei Ionuţ Simion
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27551

This paper presents the results of experimental tests on polymer concrete prepared with different wastes. Two types of polymer concrete mixes were compared. The control polymer concrete was obtained with epoxy resin, natural aggregates in two sorts (0-4 mm and 4-8 mm) and fly ash waste used as filler. To the control mix, both sorts of natural aggregate were replaced in different dosages by polystyrene granules waste. The influence of polystyrene granules as substitution of aggregate on density, ...
Autori: Andrei Burlacu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27599

Adsorption, desorption, and kinetics behavior of Gd(III) ion on chelating resin were investigated in this paper. Batch adsorption studies were carried out with different pH, contact time, and temperature. The adsorption of Gd(III) follows the Langmuir model better than the Freundlich model. The apparent activation energy Ea and adsorption rate constant are k308 4.16 kJ/mol and 6.01×10-5 s-1, respectively. Thermodynamic parameters such as ΔH, ΔS and ΔG indicated that Gd(II...
Autori: Leilei Pi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27688

In the present study, Dowex HCR-S/H, cationic resin was used as a resin for the removal of cadmium from aqueous solutions. The experiments were carried out in a batch vessel. Subsequent experiments were performed as a function of initial solution pH, resin dosage, agitation time, initial Cd2+ concentration, solution temperature and agitation speed. Ion exchange rate increased with the increase in initial cadmium concentration, stirring speed and temperature. The Langmuir, Freundlich, Elovich,...
Autori: Baybars Ali Fil
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27777

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

In this paper, we determined some mechanical properties of a new category of green composites, based on tensile tests. More precisely, we selected a set of samples from a new bio-resin based on Dammar and two sets of samples from green-composites with matrix by bio-resin and reinforced with almost compact layers of Typha latifolia or Schoenoplectus lacustris. For these built materials, we obtained the characteristic curve, tensile strength, percentage elongation after fracture and elasticity mod...
Autori: Ion Ciucă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27980