Actual trends in papermaking concern on the use of recycled fibers and minimizing effluent volume by closing water circuit. Beside environmental and economic advantages, both trends can lead to serious problems in papermaking processes due to contaminants introduced with recycled fibers and their accumulation in closed water system. A key factor to avoid disturbances in the papermaking is to prevent the accumulation of detrimental compounds. In this respect, first it is necessary to find out met...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25134

Contain all the articles from this issueICEEM/02 - ENVIRONMENTAL ENGINEERING SECTION"Treatment Technologies for Gaseous Fluxes"Surface chemistry studies on molybdena–alumina catalystTatiana Yuzhakova, ?kos R?Šdey, Endre Domokos, J??zsef Kov??cs, Monica Caldararu, Cristian Hornoiu, Mariana Carata, G.Postole, Cornel Munteanu, Larisa Strukova, Jozse FazakasHebicidal behaviour of a new N,N'- biquaternary salt of 4,4'- bipyridineServilia Oancea, Marinela Irimia, Gabriela Carja, Anton Airinei, Nicu...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25189

AbstractAdvanced closing of paper machine circuits results in the accumulation of the dissolved and colloidal substances (DCS) in the process water. At a critical concentration, the DCS are destabilizing even by small variations in paper machine parameters, producing operational and product quality problems. This article presents results of lab experiments simulating the process water recycling in short circuit of paper machine, without and with addition of fixing agents. Tests were performing w...
Autori: Dan Belosinschi, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25261

AbstractPulp and paper mills generate various quantities of energy-rich biomass as wastes, depending on technological level, pulp and paper grades and wood quality. These wastes are produced in all stages of the process: wood preparation, pulp and paper manufacture, chemical recovery, recycled paper processing, waste water treatment. Energy recovery from wastes of different origin has become a generally accepted alternative to their disposal. Pulp and paper industry expresses an interest in adap...
Autori: Dan Gavrilescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25307

AbstractObservations and data regarding the intense corrosion and deposit phenomena of the carbon steel tube bundle of the heat exchanger are presented. The bundle ensures the cooling of the light fraction C1 - C5 from the top of the distillation column which carries out the removal of pentane and smaller derivates into the RC equipment. Chemical and mineralogical analyses confirm the aggressive action of the fluids flowing through the exchanger. Tests have been done in order to replace the carb...
Autori: Ana-Daniela Georgescu, Lucian Georgescu, Maria Apostolescu, Nicolae Apostolescu, Ovidiu Georgescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25333

AbstractSolid waste management problems proved to be complex in origin and in solution. The rapid economic development and population growth experienced by the State of Penang, Malaysia have resulted in a tremendous increase in the quantities and types of solid wastes generated. Domestic solid waste is the most visible consequence of this economic development. However, considerable amounts of this waste could be recycled and reutilized if separated. This paper reviews the current status of solid...
Autori: Abdelnaser Omran, Abdelsalam O. El-Amrouni, Abdul Hamid Pakir, , Latifa K. Suliman, Mahyuddin Ramli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25353

AbstractAn experimental three-stage subsurface flow constructed wetland system was investigated for the removal of nutrient and organic matter from primary-treated domestic wastewater. Built in the Turkey Scientific and Technical Research Council-Marmara Research Center, Gebze, Turkey (Istanbul), the system consisted of a vertical flow-gravel filtration in the first stage, a horizontalsubsurface flow bed vegetated with Iris in the second stage, and a vertical-subsurface flow bed vegetated Phragm...
Autori: Bilal Tuncsiper
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25358

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25373

â€? Photocatalytic properties of titania - fly ash thin filmsâ€? Study of the viscosity of some biodiesel – diesel oil blendsâ€? Aspects refering to technical and leaching properties of the secondary aluminium slags - cement compositesâ€? Studies regarding phenol and 4-chlorophenol sorption by surfactant modified zeolitesâ€? Cu-Ni nanostructured electrocatalysts obtained by electrocodepositionâ€? Molecularly imprinted poly (vinyl alcohol) films for the selective absorption of glycyrrhizinic ac...
Autori: http://www.ecozone.ro/reviste.php?RID=25374

Abstract The paper presents the preliminary experimental results performed at laboratory scale set-up for different combined mechanochemical treatments of final effluents from a zootechnical farm from the central Moldavian region of Romania. Because of the high content of pollutants into wastewaters, the soil can be polluted and also the ground waters. To avoid this soil pollution episode, some combined mechano-chemical processes were studied and applied into a specific technological order as...
Autori: Carmen Zaharia, Mioara Surpăţeanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25434

Abstract The paper presents actual trends concerning the selective collection of the household waste. The collecting methods used in the EU countries and the results obtained by the Romanian municipalities in the last two years are also exposed. The results show thedynamics of household collection and the expectations for the next years. It is known that a town of 100 000 inhabitants collecting 100% of its household recyclable packaging waste could recycle 780 tonnes of steel, 200 tonnes of a...
Autori: Liana Baltes, Camelia Draghici, Camelia Manea, Dan Ceausescu, Mircea Tierean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25440

Abstract Literature data show that in general, plastics produced through the mechanical recycling route involve less carbon dioxide emission than when produced from crude oil. A review of readily available data shows that road transport of untreated waste plastics account for a significant portion of the carbon dioxide emission generated during recycling. Therefore, much carbon dioxide emission can be saved by optimizing the logistics in the recycling of plastics. On the example of polyolefi...
Autori: Peter C. Rem, Stig Olsen, Jan-Henk Welink, Norbert Fraunholcz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25442

Abstract The mass of usage of secondary plastics are mostly determined by their quality and price. Therefore it was essentially to collect and evaluate the related aspects and expectations from the potential secondary-plastics users. To enable this in the frame of the W2Plastics EU7 project (Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste) an adequate questionnaire was worked and sent out to automotive plastics end-product man...
Autori: Andrea Toldy, Brigitta Bodzay, Mircea Tierean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25443

Abstract The European annual consumption of plastic materials has increased from 24.6 Mtons in 1993 to 39.7 M tons in 2003 and it is likely to keep growing. Europe is faced with the challenge of managing millions of tons of waste plastics. At the same time, polymer recyclers and manufacturing industries do not find enough secondary polymers of consistent quality. Plastics production and use has a range of environmental impacts because of the considerable quantity of resources needed as raw ma...
Autori: Peter Rem, Venga Solaria, Francesco Di Maio
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25444

Abstract The waste recycling done in order to obtain composite products with performant properties and also, with long life cycle is the main purpose for the sustainable development. The present paper describes the way in which, different kind of solid wastes are immobilised in an organic resin as a binder matrix. Composites with different proportion of waste as, rubber/plastic, glass and silica sand have been obtained. The physical-mechanical properties and chemical stability of such organic...
Autori: Ioan Ropota, Emilia Zamfirache, Marcela Muntean
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25450

Abstract Bioremediation of heavy metal contaminated soil is one of the major concerns of our days. Phytoextraction has been lately utilized as an alternative of in situ remediation technology for polluted soils but is generally perceived to be too slow. Even so, phytoextraction is an efficient long lasting, accessible and environmentally friendly technique. The aim of this paper was to evaluate the phytoextraction potential of bean (Phaseolus vulgaris) in stress conditions induced by heavy me...
Autori: Alina Stingu, Irina Volf, Valentin I. Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25508

Abstract The paper focuses on occupational hazards and the determination of risk levels. Indoor climate, lighting, noise, chemicals and dust are examined. A simple/flexible risk assessment method is provided. The results of measurements of occupational hazards in six industries (mechanical, printing, wood, plastic, clothing and water purification plants) in Estonia are presented. The overall purpose of the paper is to draw the attention to the importance of measurements of occupational hazard...
Autori: Piia Tint, Marina Jarvis, Karin Reinhold, Onnela Paas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25521

Abstract When plants are exposed to heavy metals influence, the processes of growth inhibition, ion leakage of all membrane, distribution of pigment and even more death of plants are produced. The physiological and biochemical changes in germinating seedling and cultivation in plastic pots experiments of different plant species (maize, bean, oat, and spinach) were investigated under the influence of copper ions as stress agent. Differences between tolerances against copper excess in the case ...
Autori: Alina Stingu, Irina Volf, Valentin I. Popa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25578

Abstract In Europe, recovered paper is a valuable raw material for the paper industry already since the early 20th century, actually corresponding to half of the total use of fibres for paper and board production. The aim of this paper is to describe the present status of paper recycling in Europe and thereby to create a data basis for evaluation the results of the FP7 project ?Recovered Paper Sorting by Innovative Technologies ? SORT IT. The overview is based on specific questionnaires addre...
Autori: Dan Gavrilescu, Elena Bobu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25579

Abstract:This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referredto as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chainsincluding activities after end-of-life of products, (2) value communication between stakeholders in extended value chains, and (3)creating an integrated development approach for optimized bio-based products. Most existing models for v...
Autori: J.W. Lin, Jarmila Kopecká, Kim Ragaert, Ludwig Cardon, Maarten De Groote, Rolf Koster
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25728

Abstract:Composite manufacturing from plastic wastes of polyethylene terephthalate (PET) type, sand-blasting represents a materialrecovery of the wastes. This process can be achieved, with the purpose of reducing the material consumption which is in deficit,production costs, and the duration of the technological processes.Thermoplastics composites obtained by a melting process at 170-200 oC, wastes incorporation and solidification in forms replacesuccessfully the thermo rigid composites obtained...
Autori: Ioan Ropotă, Marcela Muntean, Mihai Bratu, Ovidiu Dumitrescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25741

Abstract:The insufficient waste collection service and scarcity of studies about municipal solid waste (MSW) generation in rural communities from developing countries has negatively influenced how MSW is managed by residents and authorities. This has brought about pollution and affected the quality of life of the residents from those communities. This study aims to determine the quantity and type of household waste generated, as well as to know the perception of the community on MSW management i...
Autori: Carolina Armijo, Paul Taboada-González, Quetzalli Aguilar-Virgen, Sara Ojeda-Benítez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25810

Abstract:The hereby article presents a part of the results of the research made by the author during his PhD degree preparation with respect to asbestos and plastics wastes recycling in the form of composite with polymeric matrix, respectively the toxicological tests performed on the new product. In this respect, three categories of tests were made based on complex and modern analysis methodologies, with high results accuracy: spectral analysis of the wear wastes, morphological analysis of the w...
Autori: Cristina Corpodean, Silvian Ionescu, Valeriu Deac
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25812

This paper is part of LCA studies performed in the frame of FP7 project �Recovered Paper Sorting by Innovative Technologies - SORT IT�. It analysis the results obtained by Life Cycle Impact Assessment (LCIA) of the reference case for recycled packaging paper manufacturing (current sorting technology), which will constitute a comparison base for new sorting technology developed in SORT IT project. The main stages considered in the life cycle were: recovered paper (RP) transport from collectio...
Autori: Alina Iosip, Antonio Dobon, Elena Bobu, Mercedes Hortal
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25860

AbstractEfficient large-scale recycling of polymeric wastes for automotives is of increased interest from ecologic and economic point ofview and represents an important goal for the car recycling industry. One alternative is to develop novel composite materials,relying on waste car parts, for indoor or outdoor large-scale applications, without using small molecular plasticizer or otheradditives but insuring a good compatibility for large percentages of thermoset plastics in the composite. Previo...
Autori: Anca Duta, Cristina Cazan, Dana Perniu, Mihaela Cosnita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=25982

AbstractThe evaluation of the environmental impact of transport infrastructure entails a complex characterization of factors, attitudes andconsequences. In the frame of an ecologically friendly approach, sustainable alternatives and solutions for road asphaltpavements production and exploitation must be identified. A comparative evaluation of the environmental impact for recycledand traditional road pavements asphalt mixtures, expressed as the amount of equivalent carbon dioxide, per ton of mixt...
Autori: Alina Mihaela Nicuţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26096

AbstractThis paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitabletechnologies for the construction of durable and environmental friendly rigid pavements by using recycled cement concrete,resulted from various demolition works. Various recycling principles and technologies, specific laboratory methods of improvedtechnical solutions to enhance wear coefficients, density homogeneity, mixture contamination and water absorption o...
Autori: Marius Muscalu
ISSN: 1843 - 3707Abstract This paper presents the results of the research analyses and laboratory studies, aiming to develop design guidelines and suitable technologies for the construction of durable and environmental friendly rigid pavements by using recycled
http://www.ecozone.ro/reviste.php?RID=26098

Abstract Poly(hydroxybutyrate) (PHB) is a biodegradable thermoplastic polyester with very high potential for industrial applications. The properties could be improved by mixing with another polymer, natural or synthetic, such as poly(vinyl alcohol) (PVA). The resulting polymer blends are potentially able to achieve the desired performance for different applications. Biodegradation modifies mechanical, physical and chemical properties of a given material. PHB are degraded by diverse...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26111

AbstractWater-based printing ink has been used widely and perfectly in printing the packaging of food, drug, and wine products etc.However, due to the need of altering different colors of ink, most water-based printing ink wastewater was generated from theequipment cleaning process. Coagulation combined with Fenton process has been used for this kind of wastewater treatment inthis study, results showed that coagulation using polyaluminium chloride (PACl) as coagulant and ferrous sulfate (FeSO4) ...
Autori: Xiangjuan Ma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26214

AbstractWater system integration can minimize both fresh water consumption and wastewater discharge from the paper mills. In thepresent study, Pinch Technology was used to analyze and optimize the water network of an integrated paper mill. A system wasdeveloped and a limiting constraint (COD concentration) was identified based on investigations for water quality, and thenminimum fresh water and wastewater targets were determined without considering water losses. The analysis was extended byestim...
Autori: Sudheer Kumar Shukla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26240

AbstractThe applications of biofilm treatment technologies for domestic wastewater are being increased in many parts of the world. Theaim of the study is to assess a compacted aerobic attached growth fix-film unit (termed Bio-cache) for treatment of small volumedomestic wastewater. The system consists of the miniature plastic packing matrix, which provides a large surface area of 300m2/m3, so as to maintain the high rate growth of viable organisms responsible for organic degradation. The study o...
Autori: Alireza Valipour
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26266

AbstractThe efficiency of solar disinfection (SODIS) was evaluated and enhanced by concentrating sunlight at low pH values in a solar collector disinfection (SOCODIS) system at different sunlight intensities and is highlighted in the author’s earlier findings. In order for further improving the rainwater disinfection, simple technique like wrapping the PET bottles with heat-resistant plastic bags (Wp) were used for enhancing the thermal/synergistic effects of solar radiations. An analysis of the...
Autori: Abdulrahman Ali Alazba, Mooyoung Han, Muhammad Nasir Amin, Muhammad Tahir Amin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26298

AbstractThe researches were initiated in the context emphasized by the competition having the idea of profit at its base, and sustainabledevelopment, which imposes limitations through different regulations and standards which would involve supplementary costs.The research highlights the main trends in plastic product design in conditions of sustainable development of society. Plasticshave an important role in the configuration of the new products just in the phase of conception. Having in mind t...
Autori: Petrica Corabieru
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26472

AbstractThe present work is dealing with the identification of the mercury sources and the quantification of the mercury level in air andurban dust in the industrial area of Iasi municipality. A correlation between some meteorological indicators, atmospheric mercurycontent and the urban dust from the investigated area was pointed out, based on the real time measurements as well as spatialdistribution of other heavy metals in urban dust.The measurements of mercury level in air were carried out at...
Autori: Oana Maria Tucaliuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26479

AbstractMunicipal solid waste management is a matter experienced by the entire world, mostly encountered in urban areas as a result ofpopulation growth and increased income per capita. This issue always posed threats to environmental quality and human health,and continues to be one of the major environmental problems people continues to face. In the last few decades, the systemsanalysis techniques have been applied to manage the municipal solid waste (MSW) streams through a range of integrativem...
Autori: Cristina Ghinea
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26481

AbstractThe primary objective of this research was to develop safe, programmable and cost-effective technologies of plantlet productionfrom the seeds of undomesticated American populations of Virgina fanpetals (Sida hermphrodita RUSBY). During our seedpriming treatment experiments, approximately 40% of the Virginia fanpetals seeds that were high-quality, infection-free,normally imbibing and germinating seeds. Our spring propagation tray experiments indicated that the spring large-scale trayplant...
Autori: Erika Kurucz
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26545

AbstractThe thermal and water insulation of buildings is extremely important. Currently, the most applied insulation materials in thebuilding sector are plastic foams and fibrous materials. Different types of polystyrene materials are used as water and thermalinsulators, e.g., expanded polystyrene (EPS) and extruded polystyrene (XPS). The differences between the different polystyrenematerials is found in their manufacturing processes and thus in their microstructure. Our research focuses on the ...
Autori: Ákos Lakatos
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26546

AbstractThe general aim of this paper is to demonstrate the sustainable management of a broad spectrum of wastes (livestock, industrial,agri-food, agricultural and non-recyclable fraction proceeding from waste treatment plants) in an integrated plant. Thetechnological development and practical application of the “Mixed Plant” concept is used to achieve this objective. In order tovalorize in a joint form all the above-mentioned categories of waste, two different processes have been integrated. Th...
Autori: Dolores Hidalgo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26579

Abstract The aim of this paper is the adaptation of an Ecodesign methodology for product publishing SMEs that have implemented Lean Management. To obtain verification of this methodology, an eco-redesign case study of a product has been carried out from a furniture publishing SME which applies lean management to its entire production chain. Some proposed improvements resulting from this case study were: Design for dismantling, Multifunction, Dematerialisation, Increasing the material of rene...
Autori: Sara González-García
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26592

Abstract Bioplastics are biobased materials, usually easy biodegradable, derived from renewable resources. Evolution of bioplastics production is related to: bio starch and starch mixtures (74.5%); bioplastic products from fermentation (13%), bioplastic from petrochemicals materials (12.5%). They are seen as a viable solution to avoid some environmental impacts caused by the use of fossil-based conventional plastics. In this context, the general objectives of this study entail the analysis a...
Autori: Elena-Diana Comaniţă
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26688

Abstract The aim of this paper is to determine the heat of combustion of plastic wastes resulted from municipal solid waste, automotive shredder facility waste and building and construction waste. The plastic wastes have been separated by flotation technique using as flotation media: water, ethanol, their mixtures and magnetic fluid. Resulted fractions have been analyzed aiming to determine the most effective fraction from the heat of combustion point of view. The obtained results have been ...
Autori: Liviu Costiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26750

Abstract Extensive use of plastics leads to the increase of non biodegradable wastes that have to be recycled due to both dramatically decrease of natural resources to producing them and to their increasing need as well as due to environmental issues. Most of goods made by materials based on wastes have to be commonly used by people. Antibacterial character of those is necessary to avoid epidemics. This paper deals with determination of antimicrobial character of materials based on polymeric...
Autori: Florica Silvia Cristina Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26751

Abstract This paper reports the activity, promoted by the Italian agency for new technologies, energy and sustainable economic development (ENEA), in the framework of the project for the development and implementation of the first Italian Platform for Industrial Symbiosis implemented in Sicily (2011-2015). The goals of the project were: to provide a methodology and an instrument for industrial symbiosis implementation at regional scale, to implement a IS Platform as a support to SMEs to ind...
Autori: Laura Cutaia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26774

Abstract The recent awareness about recycling also involves the resources used in civil engineering. The use of Recycled Aggregate Concrete (RAC) has several advantages in terms of conservation of natural resources and of reduction of pollution. Although the interest on the use of structural concrete with recycled aggregates is increasing, extensive studies on the mechanical behaviour of such materials that can allow their use in alternative to standard concrete are still lacking. As a conse...
Autori: Marco Breccolotti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26776

Abstract The increasing diffusion of Hi-tech complex products has raised the attention of scientific community towards their End of Life (EoL) treatment, both in terms of assuring an appropriate disposal, to avoid the dispersion of harmful substances, and at the aim of their exploitation as valuable sources of raw materials. Within this study an integrated approach for waste electrical and electronic equipment (WEEE) end of life treatment is proposed based on the integration of hydrometallur...
Autori: Claudia Brunori
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26777

Abstract The amount of collected Waste Electrical and Electronic Equipment (WEEE) in Europe is growing about 7 wt.-% per year (2007- 2012). It contains a number of economically relevant base, precious and high-tech metals. However, only a limited number of these metals can be recovered by currently applied recycling processes. Especially high-tech metals like gallium, germanium and tantalum get lost during the treatment of WEEE. The pyrolysis technology allows an accumulation of these metals...
Autori: Peter Hense
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26785

Abstract As the percentage of segregated waste, taken as individual indicator, is insufficient to measure the virtuosity of a Municipality waste management, a multicriteria indicator has been developed to broaden the horizon of the analysis of waste management performance. The aim of this study is to experiment a new and easy–to-use methodology for the evaluation of Municipalities virtuosity in waste management, built from Public Administrators to verify the responsiveness between thei...
Autori: Alessandra Bonoli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26786

Abstract The European Commission has introduced a whole range of policies and initiatives to promote the product eco-innovation and the environmental impacts reductions. One of the key topic for the reduction of the environmental impacts is the waste recycling and reuse (turning waste into useful resources). A teamwork of Politecnico di Milano has developed a research work, still ongoing and continuously updated, called “The usefulness of the useless. Cross-sectorial evaluation of wast...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26788

Abstract This paper discusses end-of-life (EoL) modeling issues in Life Cycle Assessment (LCA), through the application to a domestic cooker hood. Two EoL approaches are applied and discussed, namely the avoided burden and the one recommended by the Product Environmental Footprint (PEF) Guide, presently under testing. While no case studies on PEF application have been published yet, to the best of our knowledge, the scientific community is questioning the robustness and relevance of some me...
Autori: Francesca Reale
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26790

Abstract The recycling and later use of construction and demolition waste (C&D waste) as construction materials present a strategic inconvenience for many stakeholders involved in the sustainable construction. In some countries, the recycling percentage of C&D waste is around 80% of the C&D generated. However, in other countries this percentage is much lower. This complexity requires a better understanding of the recycling dynamic. In the specific case of Spain, the National Inte...
Autori: Nuria Calvo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26817

Abstract The recycling of plastic waste is important both in the conservation of resources and the environmental protection. A plastic waste (PE/PP/PS/PVC) was pyrolyzed over a series of post-use FCC catalysts using a fluidizing reaction system similar to the FCC process operating isothermally at ambient pressure. Experiments carried out with these catalysts gave good yields of valuable hydrocarbons with differing selectivity in the final products dependent on reaction conditions. A model ba...
Autori: Ta-Tung Wei
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26836

Abstract This paper analyses mass and energy balances of some Integrated Municipal Solid Waste Systems (IMSWS) focusing on MSW sorting, treatment and energy recovery conversion chains suitable for the last entries into the European Union (EU). In particular the Romanian case-study has been developed as reference scenario. In this context the actions timelines for the case-study are immediate (S1A), midterm (S1B) and long term (S2). In the scenarios S1A, S1B a poor selective collection (SC) i...
Autori: Gabriela Ionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26878

Abstract In the present study, several selected formulations based on recycled (rPP) or virgin polyolefins (vPP) and lignocelluloses were prepared and subjected to microorganism attack. Biodegradation tests were performed with microbial strains belonging to fungal genera, like Aspergillus, Penicillium and Fusarium. The initiation of biodegradation was demonstrated by Scanning Electron Microscope (SEM) micrographs showing the colonization of surface samples by microbial strains. The crystalli...
Autori: Luiza Jecu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26879

Abstract In the European Union, the hazardous waste recycling has become a priority, as response at legal prohibition for landfilling of untreated WEEE. The economic and eco-efficient recycling methods acquire more and more interest from the industry. The Cathode Ray Tubes (CRT) glass derived from Waste of Electric and Electronic Equipment (WEEE) dismantle is known as hazardous waste, because of their heavy metals content, especially lead. For this type of waste, the authors have proposed in...
Autori: Antoanela Popovici
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26890

Abstract Poly(vinyl chloride) (PVC) is the most widely used material for the production of medical devices such as intravenous fluid bags and tubing, enteral feeding, dialysis equipment and catheters. Despite of their numerous advantages, the plastic medical devices are non biodegradable and prone to microbial colonization causing biofilm associated infections which are difficult to treat and tend to chronicisation. A possible solution to surpass these limitations could be the fabrication of...
Autori: Petruța Stoica
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26894

Abstract In Palestine, environmental problems associated with industrial solid waste (ISW) have increased significantly in recent years. This paper presents survey results on current industrial solid waste management (ISWM) practices in the governorates of Nablus and Ramallah & Al-Bireh, Palestine. Solid waste generated from industries was quantified, characterized and discussed in terms of generation rate, storage, reuse/recycling, transportation, and final disposal. An attempt was made...
Autori: Issam A. Al-Khatib
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26903

White pollution is a form of environmental pollution which has taken unprecedented dimensions in many cities of Europe over the last two decades. It is estimated that by 2020, European Union citizens will reduce the consumption of plastic shopping bags by 80% in ways that will be identified and implemented by each member state. Starting from these two main dimensions, necessity and opportunity, we have conducted a survey on the eco-responsible behavior of consumers in Bucharest. The main aim...
Autori: Armenia Androniceanu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26972

Environmental threats posed in the environment by plastic production and plastic wastes continue to be a major problem today, closely connected with the increase of plastics consumption by the population. Moreover, little efforts are involved in some parts of the world associated to plastic waste collection, recycling and reuse. Considering all these prerequisites, the identification and discussion of risks generated by plastic production and waste in the environment are performed in this pap...
Autori: Elena - Diana Comăniță
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=26990

The release of nitrogen compounds into the environment is a major concern worldwide. Different studies howed that recycled materials have a high removal capacity for pollutants. Bentonite and its major clay minerals, smectites clays are common bleaching agents used for oil refinery bleaching and known as bleaching earth (BE). In this study regeneration of spent bleaching earth (SBE) acquired from the vegetable oil industry was surveyed via different methods and the regenerated spent bleaching...
Autori: Mohammad Malakootian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27000

This paper presents a research on ways to reduce waste and to diminish sound pollution by recovery of fir sawdust and recycled rubber granules and use in making sound absorbing composite materials. Four materials were prepared using raw materials (fir sawdust and recycled rubber granules) in various percentages, and polyurethane binder. Materials mechanical and acoustic properties were characterized, proving these materials have useful properties. Materials acoustic performance was compared w...
Autori: Ancuţa Elena Tiuc
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27039

The roots of this study are generated by the problems of plastic waste accumulations: insufficiency of storage spaces, storage costs and outgoings of plastic waste recycling, recovery, decomposition or reprocessing. The paper develops and details a modular prototype, for multifunctional territorial use, offering non-polluting and aesthetic possibility of plastic waste storage. The progress in the related fighting pollution areas have been approached, such as waste management through ecologica...
Autori: Doina Mira Dascălu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27112

We computed the Product Environmental Footprint (PEF) to identify the environmental performance of recycled wool by means of data belonging to a real case study in Italy. First, we analyzed inventory data quality by computing the data quality rating (DQR) index, according to the criteria provided by the PEF protocol. Quality of specific and generic data (selected from the Ecoinvent database) was evaluated as excellent and good, respectively. We then quantified the impacts related to each rele...
Autori: Silvia Bamonti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27121

This work was aimed to test the suitability of an epoxidized cardanol derived plasticizer for the production of soft PVC characterized by low environmental and toxicological impact soft PVC. Nowadays, the use of natural derived plasticizer in soft PVC industry is emerging as valid alternative towards conventional phthalate plasticizers, in order to reduce the environmental and toxicological impact of soft PVC. In facts, cardanol is a natural and renewable resource, characterized by a wide wor...
Autori: Antonio Greco
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27128

Waste frying oil (WFO) is a complex and heterogeneous waste collected mainly from restaurants and, to a lesser extent, from food processors and households. In the last decades, interest for this waste has deeply grown and a strong competition in grabbing this raw material has begun. About 90% of WFOs collected in Europe is recycled for biodiesel production, being the high free fatty acids (FFAs) concentration in WFOs one of the main drawback limiting the yield of the conversion process. In th...
Autori: Cinzia Pezzella
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27130

In this study, the potential for biogas production from biodegradable bioplastics was evaluated. Mater-Bi® (a family of maizestarch based flexible films) and PLA (PolyLactic Acid; a rigid, polylactide-based, polymer) bioplastics were digested in laboratory batch reactors, alone or in co-digestion with pig slurry or scotta (partially deproteinized cheese whey), at 35°C or 55°C. Methane (CH4) and hydrogen (H2) production were monitored during the incubation period. Maximum CH4 (Mmax...
Autori: Ciro Vasmara
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27134

In this paper we applied multi-criteria methods of decision in order to establish the best encapsulation material to be used in producing photovoltaic modules. The encapsulation materials play an important role in establishing the PV module performance, especially if referring to their ability to increase their life time. For our study, we have considered the most widely used encapsulation materials available on the market, such as Ethylene-Vinyl Acetate (EVA), Polyvinyl Butyral (PVB), Thermo...
Autori: Gabriela Demian
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27169

In this paper photo-oxidative degradation of degradable mulching films was studied. Low-density polyethylene (LDPE) films were denominated as 3# and 4# (containing 3.43% and 0.44% degradable masterbatch, respectively), They were exposed to different irradiation condition of i: ultra violet A irradiation (UVA), ii: ultra violet A and B irradiation (UVA-B), both at 58±2°C. The physical chemical property of the plastic film is influenced by factors in many aspects, especially the composi...
Autori: Ya-xi Huang
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27232

The aim of the present work is to investigate the effect of marble waste fillers incorporation on the mechanical properties of Recycled Aggregate Concrete (RAC). The RAC studied mixes were 0, 5, 8 and 10% (by weight of cement) of marble fillers respectively. Direct tests of compressive and flexural strength and non-destructive testing (NDT) (rebound hammer, ultrasonic) were performed. The optimal content of 5% marble fillers showed an improvement for both used test methods (compression, flexion ...
Autori: Larbi Belagraa
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27240

Sustainability and integration are becoming keywords in many European Union policies, including ones that are directly or indirectly related to mineral resources and waste management. Moreover, life cycle thinking (LCT) is core to many of these policies. The European Commission has issued the Communications “A resource efficient Europe” and “Roadmap to a Resource Efficient Europe”, the stated goal of which is to reconsider the whole life cycle of resource use so as to mak...
Autori: Gian Andrea Blengini
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27267

End-of-life liquid crystal displays (LCD) represent a potential source of secondary raw materials for their relevant content of valuable materials, like plastics and metals. Furthermore, the combination of traditional and innovative recycling processes allows the recovery of indium, defined as critical raw material by European Commission. In this context, we have evaluated the environmental impacts of different management scenarios: incineration, the current recycling strategies and more inno...
Autori: Alessia Amato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27401

The data presented in this work has been obtained from experimental research aiming towards the usage of natural resources of the National Park of Sila in Calabria, Southern Italy. Such resources are: “Laricio” pine resin, beeswax, mineral inert and charcoal to make natural glues. Furthermore, research has been done to find out if by using small quantities of carbon nanotubes, the strength of adhesion of prepared glues improves. Raw materials were characterized by physico–ch...
Autori: Pierantonio De Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27402

Biofuels and biochemicals are currently centre stage in the on-going scientific and political debate. The prevalent opinion is that their use can significantly reduce the greenhouse gases (GHGs) emissions and primary energy demand along their whole value chain. This study aims at evaluating the environmental impact in terms of GHGs related to carbon dioxide (CO2) of secondgeneration sugars (2GSs) production from cardoon residual biomass. Cardoon is a favourable crop in Mediterranean areas for...
Autori: Maria Teresa Petrone
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27413

Improving the awareness of the responsibility of our actions is the basis of achieving the ambitious aim of waste management and prevention established by the European Waste Framework Directive 2008/98/CE and the most recent Circular Economy Package. Circular Economy is connected both to improve manufacturing technologies and also educate people towards responsible consumption and waste reduction. Due to its educational and institutional role, universities provide a context to rethink not on...
Autori: Sara Rizzo
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27414

This paper describes shortly some outcomes of a project aiming to apply a scientific research directly to industry, passing through a system that wants to promote an economic "Pact" in relation to the new construction and renovation projects of energy, according to its fundamental guidelines of the moment: renewable energy and energy efficiency. The key point is to produce energy from recycled materials that become functional to dwellings (from the garden shed to furnishings, etc.),...
Autori: Marco Santarelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27421

Reduction of environmental pollution in general, and emissions of greenhouse gases in particular, remain priorities for the sustainable development of human society. The strategies applied for designing industrial manufacturing processes were radically changed; nowadays the focus is mainly on the efficient use of energy sources. This means that at this moment there is a huge demand for innovative environmentally friendly technologies, for various industrial processing sectors. Electromagnetic fo...
Autori: Dorin Luca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27539

Recycling of battery components for natural resources sustainability and consumer products has become an important endeavor that demands continuity through effective processes. In compliance with the need for waste management, LiMn1/3Ni1/3Co1/3O2 in the positive electrode of spent lithium-ion batteries has been recovered using specially designed device, consisting of two compartments separated with a plastic sieve of pore size 0.2mm. The upper compartment equipped with a mechanical stirrer conta...
Autori: Oluwatosin Emmanuel Bankolehttp://www.ecozone.ro/reviste.php?RID=27581

Social upgradation results more postconsumer glass and plastic waste and continuously demands newer techniques for their management. This research proposes a new waste-to-waste management strategy by using waste glass for polyolefin degradation. For this purpose, waste glass is activated by mechanochemical treatment and resultant material is used for the thermal pyrolysis of polyolefin. Certain improvement in the product quality is achieved by selectivity towards more alkane fraction. ...
Autori: Pooja Singh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27586

Recycling of solid plastic waste composed of post-consumer mixed polyolefines (polypropylene and polyethylene) was carried out by injection moulding of secondary material streams. The materials have been characterized by melt flow index (MFI), tensile, bending and impact measurements, density and differential scanning calorimetry (DSC). The sink-float technique was used to separate the polyethylene fraction, which was then blended into virgin polyethylene at different ratios and processed anew. ...
Autori: Laurens Delva
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27646

The Silicon wafer plays an important role in modern electronic products. During the production of Silicon wafer, a large amount of scrap Silicon wafer is generated. The necessity for it to be recycled and recovered is of vast importance since the metal Silicon (Si) is the major by product. Besides Silicon, the wafers also contain a small quantity of Copper (Cu) and Aluminum (Al), that are considered as minor elements during the recovery process of the Silicon wafer production. Therefore, in o...
Autori: Ching-Hwa Lee
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27660

The main objective of this research was to evaluate the environmental impact generated by municipal solid waste during its collection, transportation, treatment and processing in the south-west region of the department of Norte de Santander, Colombia, by means of Life Cycle Assessment (LCA). Three strategies for waste management were considered: the current baseline situation, wherein 100% solid waste was taken to the landfill; plus, an optimistic and a pessimistic scenario in which solid was...
Autori: Oscar Orlando Ortiz-Rodriguez
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27665

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27782

Influence of soil pH on the mechanical characteristics of glass reinforced plastic (GRP) pipes type was often investigated in different situations encountered in the field. GRP degradation is directly proportional to the exposure to soil with non-neutral reaction. The theoretical and experimental results lead during time to design standards, which allow the application of GRP pipes in water and soil, so as minimum interferences with the materials used in the manufacture of pipes would appear. Sa...
Autori: Ana Diana Ancas
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27768

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27729

• INFLUENCING FACTORS OF THE ACCEPTABLE AMOUNT OF COMPENSATION OF FARMERS FOR CONTROLLING FERTILIZER-INDUCED WATER POLLUTION    • DETERMINATION OF THE RARE EARTH METALS IN THE RED MUD FOR POSSIBLE UTILIZATION    • Fe(II) AND Mn(II) REMOVAL FROM CONTAMINATED GROUNDWATER BY ADSORPTION: A COMPARISON OF ACTIVATED CARBON AND PINE BARK    • RESPONSE OF UPLAND COTTON GENOTYPES TO SALINITY AT EARLY GROWTH STAGES    • KINETICS AND ISOTH...
Autori:
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27730

The paper describes a flexible and low cost method regarding the progress of improvement, in terms of foot diseases, in case of wearing orthopedic shoes containing progressive correction orthotic insoles. The research in the field aims at two purposes. The first one is to find an effective method for orthopedic shoe insoles manufacturing, with the role of progressively correcting plantar diseases by using cheap solutions based on the recycled materials. The research focused on an adaptive insole...
Autori: Barbu Braun
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27757

A study was conducted to determine the composition and concentration of trace metals in suspended particulate matter (PM10) and indoor dust in two academic buildings of Universiti KebangsaanMalaysia. One building was in the final phases of renovation (UR) and the other building had just finished renovation (AR). PM10 sampling of air was performed using a low volume sampler (LVS), and samples of indoor dust were obtained using a brush and a small plastic bag. The compositions of trace metals in b...
Autori: Mohd Talib Latif
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27758

In the light of water shortages, frequently affecting many regions worldwide, domestic rainwater harvesting, and greywater reuse systems represent an alternative source of water. This study fits this framework providing a hydraulic/hydrological model developed by means of the EPA’s Storm Water Management Model. The model has been applied to a case study, which consists of an apartment building located in the city of Bologna and equipped with a hybrid rainwater-greywater recycling system. C...
Autori: Sara Simona Cipolla
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27789

Recently, more and more companies are implementing good environmental practices. Environmental certifications, besides being valuable management tools for companies, given the opportunity to strengthen their role on the market. An example of such virtuous behavior is the case of Valcucine, an enterprise of the Livenza furniture district in Northern Italy. Valcucine focuses its care in the production of furniture, in particular of kitchen units, characterized by sustainable production, eco-compat...
Autori: Veronica Novelli
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27797

The research has been focused on concretes in which the continuous phase is some kind of polymeric resin and the discrete phase is some type of mineral aggregate. Such composite materials are known as Polymer concretes (PC) and boast several advantages such as lower weights, higher resistance to corrosive environments and chemical attacks, faster curing and lower permeabilities. In PC the inorganic fraction can reach up to 90% of the total and is made up of aggregates such as sand and gravel. Th...
Autori: Paolo Pozzi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27799

The construction sector has evolved a lot over the last few years promoting the design and manufacturing of innovative and environmentally sustainable materials and products. In accordance with European and national guidelines, with a growing awareness of environmental issues several experiences are showing the interest of companies to qualify their products as green and environmentally sustainable. In the European context many directives have been introduced which, among their themes, speak of ...
Autori: Marco Migliore
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27806

The aim of this paper was to investigate the possibility of incorporation non-metal fraction (NMF) in concrete products as a substitute for aggregate on industrial scale, while other studies are mostly based on NMF incorporation in concrete only on laboratory scale. Mineral filler was supplemented with 5, 10, 15 and 20 wt.% NMF from waste printed circuit boards (WPCBs) and its influence on concrete quality was assessed based on compressive and tensile strength conducted on laboratory and indust...
Autori: Vitomir Premur
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27857

In this study we investigated the possibilities of using recyclable fine and coarse grain waste obtained by grinding Polyethylene Terephthalate (PET) containers, as light filling materials for different applications (clay dams, highway embankments, and backfills behind retaining structures. Various geotechnical tests were performed on clayey soil and soil-PET mixtures using recycled fine and coarse granules of Polyethylene Terephthalate bottles. The results indicated that the use of the recyc...
Autori: Osman Gunaydin
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27920

Among all the prominent contributors of municipal solid waste (MSW), schools have been chosen for the study since the rate of solid waste generation and its respective composition has not been reported or rather has been underestimated in the schools of Puducherry region. Hence, the present paper is an attempt to fill up this gap in our knowledge. The existing waste management system in selected schools was unsystematic and relatively scarce to meet the waste management objectives in precise ...
Autori: Rajamanikam Ramamoorthy
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27921

The paper presents the experimental results obtained on cement concrete with different types of waste and the analysis of their effects on density, compressive strength, flexural strength and splitting tensile strength. The tests results were compared with a control mix without aggregate substitution. The fly ash was used as replacement of cement and polystyrene granules, chopped plastic bottle (PET) and wood waste were used as substitution of 0-4 mm aggregate sort in different dosages from 0% t...
Autori: Vasilică Ciocan
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27978

This study evaluates the environmental impacts of four types of frozen food packages throughout their lifecycle and suggests strategies for reducing their related environmental impacts. The four most widely used frozen food packaging materials were chosen for this study: (1) pouches composed of low-density polyethylene (LDPE) film; (2) pouches composed of polyethylene terephthalate (PET) and LDPE film laminate; (3) cardboard boxes coated with LDPE; and (4) multipackage composed of cardboard boxe...
Autori: Daina Kliaugaite
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27979

In this paper, several image analysis techniques have been applied aiming to obtain useful information regarding the processing of municipal solid waste polymers. An automated color extraction method has been applied in order to quantize the color distribution in the polymer wastes aiming their resource and time-efficient separation according to their color. Also, by processing different density fractions from the polymer waste the color of the final material has been predicted, as well as th...
Autori: Silvia Patachia
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27994

This study aims to define a municipal Solid Waste Management (SWM) strategy using Multi-objective Optimization Problem (MOP) and ELECTRE method. Four waste treatment technologies were considered: recycling, composting, incineration and landfilling. Firstly, a Multi-objective Linear Programing (MOLP) model was developed. The solutions obtained from this model were ranked using the ELECTRE method. It was considered as case study a hypothetical city of 1,000,000 of inhabitants, presenting the a...
Autori: Rafaella de Souza Henriques
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=27998

Slags are the main by-products from steelmaking cycle, which are currently recycled inside the steel industry as well as in other sectors with significant environmental and economic benefits. As in Italy slags application is not yet allowed in agriculture, the paper aims at evaluating the technical and economic feasibility of a slag treatment plant, to obtain a product to be sold in the fertilizer market as soil amendment. A preliminary assessment of the fate of some trace metals (Cr, V, Sb a...
Autori: Teresa Annunziata Branca
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28012

The polyhydroxybutyrate (PHB) production by photoautotrophic cultures is a potential eco-sustainable process to produce bioplastics. The biosynthesis of PHB by cyanobacteria meets a twofold target: the use of CO2 as feedstock alternative to the fossil resource used in the conventional processes; the contribution to the reduction of the CO2 concentration in the atmosphere. This contribution reports results of a study regarding the optimal growth conditions for cyanobacteria to produce PHB unde...
Autori: Roberta Carpine
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28021

Substantial quantities of toner cartridges are produced and used in photocopiers and printers every year. Spent toner cartridges are classified as hazardous waste because they contain toner powder with specific chemical composition, making a recovery of waste toner cartridges a very important issue from the aspect of waste management and environmental protection. Spent toner cartridges are mechanically processed to exploit valuable materials such as metals, plastics and magnets and to separate t...
Autori: Ivana Melnjak
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28053

Proteins from Hermetia illucens (or Black Soldier Fly, BSF) have been employed in this study as possible source for bioplastic formulation. This type of bioplastic can replace the actual materials employed in agriculture, avoiding the critical issues concerning the soil pollution due to conventional plastic end-life. Different plasticizing agents (glycerol and polyethylene glycol) have been tested and the ability to generate a homogenous film, through wet casting, has been evaluated. Characteriz...
Autori: Silvia Barbi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28074

The combustion behavior of several polymers was studied with a cone calorimeter, while the samples were based on a recycled acrylonitrile-butadiene styrene (ABS) and as additives were considered: organic montmorillonite (OMT) and a mixture of two fire retardants (FR). The samples structure and thermal properties are characterized by means of Scanning electron microscopy (SEM), X-ray Powder Diffraction(XRD) and Energy-dispersive X-ray spectroscopy (EDX) and cone calorimeter. The main objective o...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28098

The maintenance of flexible roads or roads at end of life service generates high quantities of reclaimed asphalt pavement every year. The reuse of these materials, considered for a long time as waste, allows a substantial saving in transport, energy, and maintains dwindling natural resources. Recycling of asphalt also helps to reduce inert waste storage volumes, and conserve valuable landfill space. The applicability of recycled asphalt was tested in laboratory, and asphalt mixtures containing 2...
Autori: Mehena Oualit
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28117

The production of food wastes is a serious issue in developed and developing countries. The biogas production technology is one of the most sustainable methods for treating food wastes. Currently, there is a great need to implement suitable methods to enhance biodegradation and methane production. This study investigated the effect of manure addition and leachate lime-pretreatment on the biogas and methane production from spoilable municipal solid wastes using a hybrid anaerobic-aerobic bioreact...
Autori: Fatemeh Aliasgari
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28123

The aim of the study was to determine the relation between the composition of university recyclable material collected (plastic, paper, metal and glass), education-related factors such as the academic calendar and work stoppages, and regional factors such as climate, regional economy and composition of the urban waste collected over an 8-year period. The study was conducted based on the composition of recyclable dry solid wastes at the Federal University of Rio de Janeiro, quantified after th...
Autori: Victor Becker Tavares
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28127

Interest in water recycling has provided opportunities to evaluate the potential impact of pharmaceuticals and personal care products (PPCPs) on plants where recycled wastewater is used for watering and irrigation. Most researches have focused on the impact of pharmaceuticals on seed germination and plant physiology or the uptake of pharmaceuticals into plants. We sought to find out whether nutrient and metal uptake into wheat plants were affected by the presence of PPCPs (acetaminophen, caffein...
Autori: Etem Osma
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28193

This study is a physical characterization of household waste in the town of Annaba (Algeria North East). Based on an adequate sampling protocol that takes into account the constraints of Algerian cities; Annaba city was taken as a case study for the rapprochement of the situation in Algeria. A quantity of 90 to 120 kg was sorted for each type of habitat in the city during four seasons of the year 2010 to 2011 according to 11 components of household wastes. Variations in the percentages of som...
Autori: Hamza Cheniti
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28197

Nine samples of recycled acrylonitrile butadiene styrene (ABS) with organic montmorillonite and fire retardants adding were combined to prepare ABS copolymer nanocomposites. A very good dispersion of clay and fire retardant was noticed in the recycled ABS (reABS) matrix. The effect of montmorillonite and fire retardants on the mechanical and thermal properties of the reABS nanocomposites was further investigated. Experimental results showed that the addition of organic montmorillonite increased ...
Autori: Tudor Mihai Simionescu
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28203

Printed circuit boards are the most important component of any electrical and electronic device. The average metal content in waste printed circuit boards is ~30-35% whereas the rest of the material is a non-metal fraction (NMF). Metals in the waste printed circuit boards are recycled for their value whereas the NMF is mostly sent to landfills or incinerators for disposal. The circuit board laminates contain flame retardant chemicals that pose potential hazards to the environment and to public h...
Autori: Amit Dhir
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28216

Brominated flame retardants (BFRs) are used in different types of products such as plastic, textiles and electronic circuits with the aim to increase fire resistance and to avoid or to delay the propagation of accidental combustion. However, high concentrations of bromine in waste from electrical and electronic equipment (WEEE) hinder the possibility of their use as secondary raw materials. Furthermore, the possibility that BFRs can be released during mechanical recycling processes, imposes the...
Autori: Giuseppe Bonifazi
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28296

Plastic and circular economy are key words that characterize our present and seek to address the future of the global social economic system. Plastic, on the one hand, is the emblem of modern times, a low cost material with unparalleled functional properties. Circular economy, on the other hand defines an alternative model to traditional economy that focuses on sustainability. In this work, the author presents a case study relating to a virtuous example of circular economy applied to the industr...
Autori: Leonardo Mita
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28301

The steady increase in separate waste collection has highlighted the urgent need to adequately deal not only with urban waste (differentiated and undifferentiated) but also with special waste produced by separate waste collection and recycling processes. Source collected municipal solid waste produces different waste streams. One of this is the organic fraction of municipal solid waste (OFMSW). This fraction is central for circular economy, since it can be further transformed in order to recove...
Autori: Ivana Moscato
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28302

This study analysed the recycling of debris derived from the partial and selective demolition of concrete structures of Sant’Elia Stadium in Cagliari (Sardinia, Italy). This recycling was carried out to obtain coarse recycled aggregates for the production of recycled concrete. The experimental investigations demonstrated the possibility of using these recycled concrete aggregates in structural concrete and in precast concrete element, with unchanged production processes and suitable mechan...
Autori: Luisa Pani
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28307

Saline-sodic soil reclamation can be enhanced with a sustainable and environmental approach by using organic waste materials. Moreover, wastewater can be used in leaching processes to protect freshwater resources in regions with water shortages. The aim of this study was to reclaim saline-sodic soil by using recycled wastewater and stabilized sewage sludge together with gypsum. The experiment was designed with three replicates using four different sewage sludge doses (0, 4, 8 and 12 kg m-2), an...
Autori: Almujtaba Hassbalrassol Muhammed Abdallh
ISSN: 1843 - 3707
http://www.ecozone.ro/reviste.php?RID=28330